Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[adslmax]

I was very surprised that my G.fast are one of the highest sync today 242/39. Count myself lucky indeed.

Code: [Select]

DSLAM type / SW version: BDCM:0xc190 (193.144) / v0xc190
Modem/router firmware:  AnnexA version - A2pvfbH043q.d26u
DSL mode:                G
Status:                  Showtime
Uptime:                  27 days 16 hours 28 min 53 sec

Downstream Upstream
Line attenuation (dB):  38.6 0.0
Signal attenuation (dB): 38.6 0.0
Connection speed (kbps): 242491 39324
SNR margin (dB):        3.1 3.1
Power (dBm):            0.0 4.0
Interleave depth:       
INP:                    550.00 607.00
G.INP:                  Not enabled Not enabled
Vectoring status:        Unknown

RSCorr/RS (%):          0.3093 0.3390
RSUnCorr/RS (%):        0.0000 0.0000
ES/hour:                0 0


[maxheadroom]

I thought you were told to stop this.

Why are you so obsessed with speed and why do you constantly check it, the only time i test mine is when a website take's a few seconds to load and it usually turns out to be the site not connection.

[adslmax]

It's good to download even faster 

[Weaver]

I am enjoying my 7 Mbps downstream and 1 Mbps upstream. Hurrah for you.

[jelv]

It's good to download even faster 

If you didn't waste so much of your time looking at stats and speed tests it wouldn't matter that downloads take a few seconds longer!

[tubaman]

It's good to download even faster 

Download what though, speed test results mostly it appears. 

[4candles]

It's good to download even faster 

But have you any interesting content to report?

[JordanBlack68]

900 down and 100 up here. Count myself lucky indeed.

[adslmax]

Don't know what is going on? Internet went down for 20 minutes then come back with low sync 

Code: [Select]

Stats recorded 26 Oct 2021 01:24:37

DSLAM type / SW version: BDCM:0xc190 (193.144) / v0xc190
Modem/router firmware:  AnnexA version - A2pvfbH043q.d26u
DSL mode:                G
Status:                  Showtime
Uptime:                  0 hour 20 min 15 sec
Resyncs:                0 (since 26 Oct 2021 01:03:54)

Downstream Upstream
Line attenuation (dB):  38.0 0.0
Signal attenuation (dB): 38.0 0.0
Connection speed (kbps): 167196 16516
SNR margin (dB):        9.1 6.9
Power (dBm):            0.0 4.1
Interleave depth:       
INP:                    550.00 607.00
G.INP:                  Not enabled Not enabled
Vectoring status:        Unknown

RSCorr/RS (%):          0.0011 0.0017
RSUnCorr/RS (%):        0.0000 0.0000
ES/hour:                0 0


[meritez]

Looks like your SNR has jumped from 3.1 to 9.1.

There could be some overnight work being done at the exchange or street cabinet, does unchained have a network status checker?

[adslmax]

Everything back to normal now

Code: [Select]

DSLAM type / SW version: BDCM:0xc190 (193.144) / v0xc190
Modem/router firmware:  AnnexA version - A2pvfbH043q.d26u
DSL mode:                G
Status:                  Showtime
Uptime:                  11 hours 14 min 29 sec

Downstream Upstream
Line attenuation (dB):  38.0 0.0
Signal attenuation (dB): 38.0 0.0
Connection speed (kbps): 222491 35324
SNR margin (dB):        3.1 3.1
Power (dBm):            0.0 4.0
Interleave depth:       
INP:                    551.00 607.00
G.INP:                  Not enabled Not enabled
Vectoring status:        Unknown

RSCorr/RS (%):          0.3193 0.3390
RSUnCorr/RS (%):        0.0000 0.0000
ES/hour:                0 0


[Weaver]

Does anyone have G.INP with G.FAST ? Or vectoring?

[adslmax]

My G.fast is G.INP and Vectoring enabled.

Code: [Select]

Retransmit Counters
rtx_tx:         6162            1300
rtx_c:          5529            0
rtx_uc:         0               0

Bearer 0
INP:            551.00          607.00
INPRein:        0.00            2.00
delay:          0               0
PER:            0.00            548.47
OR:             481.60          171.73
AgR:            23090.83        19261.78

xdslctl info --vectoring
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    1
Last initialization procedure status:   0

as my ISP told me you can't run G.fast without vectoring as all G.fast must have vectoring enabled by Openreach.

[j0hn]

Does anyone have G.INP with G.FAST ? Or vectoring?

The Broadcom CLI shows both G.INP and G.Vector as not enabled on G.Fast but that's simply because the chipset is showing the VDSL2 status.

Various framing parameters show that G.INP is active on the downstream/upstream on every OpenReach G.Fast connection.

I believe that both G.INP and Vectoring are mandatory within the G.Fast spec.

[adslmax]

I have contact Zyxel support about possible next firmware to support G.fast G.INP and Vectoring rather than VDSL2 status. They will look into this.