Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 2 [3]

Author Topic: G.Fast DLM made a change on the line  (Read 3423 times)

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: G.Fast DLM made a change on the line
« Reply #30 on: September 22, 2021, 04:25:28 PM »

It means that one (or more) other conductor(s) is (are) making contact with one leg of the pair of your circuit.

As the first line of that test result states: "Fault located in local network".
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

Alex Atkin UK

  • Addicted Kitizen
  • *****
  • Posts: 5260
    • Thinkbroadband Quality Monitors
Re: G.Fast DLM made a change on the line
« Reply #31 on: September 22, 2021, 05:57:01 PM »

Guess we know why the neighbour is having the same problem?  Also might suggest it WILL get fixed when their fault is looked into?

Honestly it seemed from the start there was no point chasing this up until the neighbours fault is looked into.
Logged
Broadband: Zen Full Fibre 900 + Three 5G Routers: pfSense (Intel N100) + Huawei CPE Pro 2 H122-373 WiFi: Zyxel NWA210AX
Switches: Netgear MS510TXUP, Netgear MS510TXPP, Netgear GS110EMX My Broadband History & Ping Monitors

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: G.Fast DLM made a change on the line
« Reply #32 on: September 22, 2021, 06:04:02 PM »

Am I correct here. The DLM banded on the line is only apply to both BTW adsl2 and Openreach FTTC but not sure if it does apply on Openreach G. Fast? Next door neighbour just told me they having issues again as engineer are pointless this morning when they found no fault

The openreach modem seem lots worsen than Zyxel G.fast Router which it rather odd:

Code: [Select]
177.9 / 24.7 - Openreach G.fast Modem (approved by Openreach SIN 498)

211.5 / 33.8 - My G.fast Router (non-approved by Openreach SIN 498)


The line seem stable for now for 21 hours:

Code: [Select]
xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    1
Last initialization procedure status:   0
Max:    Upstream rate = 33955 Kbps, Downstream rate = 211479 Kbps
Bearer: 0, Upstream rate = 33807 Kbps, Downstream rate = 211772 Kbps

Link Power State:       L0
Mode:                   G.fast Annex A
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        3.1             3.1
Attn(dB):        38.7            0.0
Pwr(dBm):        0.0             4.1

                        G.fast framing
                        Bearer 0
R:              10              14
N:              255             210
Q:              4               4

L:              5824            4944
Lrmc:           0               0
Ldoi:           0               4928
Rrmc:           255             210
Drmc:           14              3

Mf:             36              36
M(ds/us):       29              6

MNDSNOI:        2               2
ackWindowShift: 11              2
Ldr:            4947            4120
etru:           206287          33495
ETRminEoc:      5852            0

                        Counters
                        Bearer 0
OHF:            12894941                310034
OHFErr:         0               0
RS:             539887023               910687039
RSCorr:         171092          513294
RSUnCorr:       0               0

                        Retransmit Counters
rtx_tx:         48930           11624
rtx_c:          37161           0
rtx_uc:         0               0

                        G.fast Counters
minEFTR:        212721          34807
errFreeBits:    242111612               41448266

NOI
BSW:            348/348         56376/56376
SRA:            7/7             175/175
FRA:            0/0             0/0
RPA:            0/0             3/3
TIGA:           126/126         0/0
DOI
BSW:            0/0             0/0
SRA:            0/0             0/0
FRA:            0/0             0/0
RPA:            0/0             0/0
TIGA:           0/0             0/0

eocBytes:       57593785                146859418
eocPkts:        2030902         539486
eocMsgs:        2030902         539486

                        Bearer 0
HEC:            0               0
OCD:            0               0
LCD:            0               0
Total Cells:    21566188                9483397
Data Cells:     19535317                8943922
Drop Cells:     0
Bit Errors:     0               0

LORS:           0               0
LOSS:           0               0
ES:             0               0
SES:            0               0
UAS:            237             237
AS:             77368

                        Bearer 0
INP:            641.00          607.00
INPRein:        10.00           2.00
delay:          0               0
PER:            0.00            465.91
OR:             481.18          164.80
AgR:            22295.34        18385.78

Total time = 21 hours 33 min 25 sec
FEC:            171092          513294
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            237             237
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           0
HostInitRetr:   0
FastRetr:       1
FailedRetr:     1
FailedFastRetr: 0
Latest 15 minutes time = 3 min 25 sec
FEC:            90              1221
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           0
HostInitRetr:   0
FastRetr:       0
FailedRetr:     0
FailedFastRetr: 0
Previous 15 minutes time = 15 min 0 sec
FEC:            487             5064
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           N/A
HostInitRetr:   N/A
FastRetr:       N/A
FailedRetr:     N/A
FailedFastRetr: N/A
Latest 1 day time = 21 hours 33 min 25 sec
FEC:            171092          513294
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            237             237
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           0
HostInitRetr:   0
FastRetr:       1
FailedRetr:     1
FailedFastRetr: 0
Previous 1 day time = 0 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           0
HostInitRetr:   0
FastRetr:       0
FailedRetr:     0
FailedFastRetr: 0
Since Link time = 21 hours 29 min 27 sec
FEC:            171092          513294
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           0
HostInitRetr:   0
FastRetr:       0
FailedRetr:     0
FailedFastRetr: 0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0
ZySH>
« Last Edit: September 22, 2021, 07:04:26 PM by adslmax »
Logged

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: G.Fast DLM made a change on the line
« Reply #33 on: September 22, 2021, 07:40:28 PM »

Seem like this firmware are better for upstream according to Browni line stat:

Code: [Select]
Stats recorded 22 Sep 2021 19:36:03 - Browni's Line Stat

DSLAM type / SW version: BDCM:0xc190 (193.144) / v0xc190
Modem/router firmware:  AnnexA version - A2pvfbH043q.d27b
DSL mode:                G
Status:                  Showtime
Uptime:                  40 days 4 hours 14 min 50 sec
Resyncs:                11 (since 10 Jul 2021 12:13:01)

Downstream Upstream
Line attenuation (dB):  35.2 0.0
Signal attenuation (dB): 35.2 0.0
Connection speed (kbps): 215425 42628
SNR margin (dB):        3.3 3.1
Power (dBm):            0.0 4.1
Interleave depth:       
INP:                    550.00 607.00
G.INP:                  Not enabled Not enabled
Vectoring status:        Unknown

RSCorr/RS (%):          24.0263 4.4944
RSUnCorr/RS (%):        0.0000 0.0000
ES/hour:                0 0
___________________________________________________________________

Stats recorded 22 Sep 2021 19:36:18 - Adslmax's Line Stat

DSLAM type / SW version: BDCM:0xc190 (193.144) / v0xc190
Modem/router firmware:  AnnexA version - A2pvfbH043q.d26u
DSL mode:                G
Status:                  Showtime
Uptime:                  22 hours 2 min 27 sec
Resyncs:                0 (since 22 Sep 2021 16:50:15)

Downstream Upstream
Line attenuation (dB):  38.7 0.0
Signal attenuation (dB): 38.7 0.0
Connection speed (kbps): 215297 33748
SNR margin (dB):        2.7 3.1
Power (dBm):            0.0 4.1
Interleave depth:       
INP:                    641.00 607.00
G.INP:                  Not enabled Not enabled
Vectoring status:        Unknown

RSCorr/RS (%):          0.0228 0.0564
RSUnCorr/RS (%):        0.0000 0.0000
ES/hour:                0 0
Logged

kitz

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 33879
  • Trinity: Most guys do.
    • http://www.kitz.co.uk
Re: G.Fast DLM made a change on the line
« Reply #34 on: September 24, 2021, 03:14:19 AM »

Quote
all g fast must have vectoring as there is no way gfast can't run without it.

He is correct.  Momentory lapse of concentration - d'oh of course g.fast uses vectoring & g.inp.... and as already pointed out it must be a f/w restriction rather than lack of technology being there.

Regarding a reset:-

As J0hn says, not all ISPs have access for [VDSL] DLM reset.  BT and Plusnet were amongst the first ISPs to take up the DLM reset option and some others followed soon after but its tends to be just the larger ISPs + Zen & AAISP who can.
The DLM reset option is only available to direct Openreach customers who signed up for this feature last year. Even so, afaik this is still not an automated feature and it requires manual requests submitting to Openreach via email.  With Unchained being a VISP then it is unlikely they can do this without going through their supplier - who may or may not offer the service to their resellers.
   
Access to certain features (including the DSL checker database) are now restricted and the CP has to pay for access to the various suite of GEA tools and available information.   If they are a VISP and not a direct Openreach customer then its unlikely they will have direct access to anything much more than the checker (ven that will be limited to the no of requests they can make per day) - and basic info about customers lines. 

Quote
What is this battery contract fault mean?

Be aware that this particular check sometimes returns a false positive.  It doesn't always mean there is an actual fault. 


---------------


Quote
You must be a nightmare of a customer. There's no need to contact the ISP every single time your sync drops slightly.

I agree.  From what I can see the line rate dropped for a few hours but is now operating within normal and perfectly acceptable range.   It's not service affecting and for the life of me I cannot see why a DLM reset would be needed.  I've skipped over some posts, but why are you talking about banding?  You are syncing at over 210 Mbps so just enjoy the speed you are getting and forget the stats. 


Logged
Please do not PM me with queries for broadband help as I may not be able to respond.
-----
How to get your router line stats :: ADSL Exchange Checker

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: G.Fast DLM made a change on the line
« Reply #35 on: September 24, 2021, 11:55:08 AM »

Updated:

DLM on G.fast has re-apply changed overnight (INPRein removed on downstream 10.00 to 0.00) and re-applied INP 551 from 641 on downstream:

Speed is now back to normal 209/34 throughput  ;D ;D

Code: [Select]
xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    1
Last initialization procedure status:   0
Max:    Upstream rate = 35657 Kbps, Downstream rate = 219576 Kbps
Bearer: 0, Upstream rate = 35657 Kbps, Downstream rate = 219768 Kbps

Link Power State:       L0
Mode:                   G.fast Annex A
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        3.1             3.1
Attn(dB):        38.5            0.0
Pwr(dBm):        0.0             4.0

                        G.fast framing
                        Bearer 0
R:              14              14
N:              243             227
Q:              4               4

L:              5968            4896
Lrmc:           0               0
Ldoi:           0               5000
Rrmc:           243             227
Drmc:           14              3

Mf:             36              36
M(ds/us):       29              6

MNDSNOI:        2               2
ackWindowShift: 11              2
Ldr:            5086            4064
etru:           212533          33347
ETRminEoc:      5990            0

                        Counters
                        Bearer 0
OHF:            5769389         69594
OHFErr:         0               0
RS:             4057280416              373288634
RSCorr:         81933           152572
RSUnCorr:       0               0

                        Retransmit Counters
rtx_tx:         5937            669
rtx_c:          4680            0
rtx_uc:         0               0

                        G.fast Counters
minEFTR:        213716          34656
errFreeBits:    710223001               18689458

NOI
BSW:            2362/2362               25384/25384
SRA:            0/0             46/46
FRA:            0/0             0/0
RPA:            0/0             0/0
TIGA:           40/40           0/0
DOI
BSW:            0/0             0/0
SRA:            0/0             0/0
FRA:            0/0             0/0
RPA:            0/0             0/0
TIGA:           0/0             0/0

eocBytes:       168431368               421579442
eocPkts:        5883966         1555607
eocMsgs:        5883966         1555607

                        Bearer 0
HEC:            0               0
OCD:            0               0
LCD:            0               0
Total Cells:    3139754         1233311
Data Cells:     2234170         1010122
Drop Cells:     0
Bit Errors:     0               0

LORS:           0               0
LOSS:           0               0
ES:             0               0
SES:            0               0
UAS:            341             341
AS:             34616

                        Bearer 0
INP:            551.00          607.00
INPRein:        0.00            2.00
delay:          0               0
PER:            0.00            498.71
OR:             447.21          163.20
AgR:            22409.12        18304.67

Total time = 2 days 14 hours 21 min 17 sec
FEC:            529815          1367319
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            341             341
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           1
HostInitRetr:   0
FastRetr:       2
FailedRetr:     1
FailedFastRetr: 0
Latest 15 minutes time = 6 min 17 sec
FEC:            864             1902
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           0
HostInitRetr:   0
FastRetr:       0
FailedRetr:     0
FailedFastRetr: 0
Previous 15 minutes time = 15 min 0 sec
FEC:            3045            4299
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           N/A
HostInitRetr:   N/A
FastRetr:       N/A
FailedRetr:     N/A
FailedFastRetr: N/A
Latest 1 day time = 14 hours 21 min 17 sec
FEC:            123386          244418
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            104             104
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           1
HostInitRetr:   0
FastRetr:       1
FailedRetr:     0
FailedFastRetr: 0
Previous 1 day time = 24 hours 0 sec
FEC:            219046          554044
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           0
HostInitRetr:   0
FastRetr:       0
FailedRetr:     0
FailedFastRetr: 0
Since Link time = 9 hours 36 min 55 sec
FEC:            81933           152572
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Retr:           0
HostInitRetr:   0
FastRetr:       0
FailedRetr:     0
FailedFastRetr: 0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0
ZySH>
« Last Edit: September 24, 2021, 12:00:00 PM by adslmax »
Logged

j0hn

  • Kitizen
  • ****
  • Posts: 4093
Re: G.Fast DLM made a change on the line
« Reply #36 on: September 25, 2021, 11:23:20 AM »

I wonder if Bearer 0 INPRein 10 is the G.Fast equivalent of Retx High.

Did it affect the throughput as a percentage of sync?
Logged
Talktalk FTTP 550/75 - Speedtest - BQM

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: G.Fast DLM made a change on the line
« Reply #37 on: September 25, 2021, 12:46:56 PM »

I wonder if Bearer 0 INPRein 10 is the G.Fast equivalent of Retx High.

Did it affect the throughput as a percentage of sync?

Yes without INPRein 10 - the speed always 10Meg lower than the sync rate
with INPRein 10 - the speed are 25Meg lower than the sync rate

The upstream are unaffected! Sorry jOhn as BTw IP Profile will not work with TTB as there is no way to find out what the actually ip profile rate from sync rate but it easy to workout from between sync rate and throughput speed

EG:

Code: [Select]
Bearer: 0, Downstream rate = 211772 Kbps, Upstream rate = 33807 Kbps
Bearer 0
INP:            641.00          607.00
INPRein:        10.00           2.00
delay:          0               0
throughput speed 186/33


Bearer: 0, Downstream rate = 219768 Kbps, Upstream rate = 35657 Kbps
Bearer 0
INP:            551.00          607.00
INPRein:        0.00            2.00
delay:          0               0
throughput speed 209/35

« Last Edit: September 25, 2021, 01:03:45 PM by adslmax »
Logged
Pages: 1 2 [3]
 

anything