Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[meritez]

Talktalk don't do PPP on VDSL, only DCHP/IPoE.

They do if it's a business VDSL connection.

[Weaver]

Talktalk wholesale does PPP when they are reselling their service; for example, other ISPs such as Andrews and Arnold use either TalkTalk wholesale or BT wholesale.

[j0hn]

Indeed, only Talktalk residential do DHCP.
Their business and wholesale lines do not.

The OP is on Talktalk residential.

[Maz_17]

Hi, I was hoping I could take a look at the config as I’ve been trying myself for a while now to reach the Vigor WebGUI. I’ve followed the Netgate/pfSense how to access CPE/Modem from inside the firewall and still not able to reach the modem without plugging a laptop in directly to it and joining the 192.168.2.1/24 network.

My setup may be a little different tho, so it’ll be interesting to see how this has been setup working for others if possible.

My current setup:
Vigor167 > managed switch (untagged port vlan 88) > managed switch > pfSense on Proxmox.

Internet works via bridge mode and am able to reach both managed switches.

Any thought

[hushcoden]

I'm using OPNsense and it's pretty straightforward: assign the underlying physical interface used for PPPoE and configure it with the subnet used for modem management, create a GW and configure it to the modem IP, done (no need any outbound rules or any firewall rules on that interface).