Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[gycuk1]

Hi Jelv

i think i have done it correct

<a title="Broadband Ping" href="https://www.thinkbroadband.com/broadband/monitoring/quality/share/9ff7838a048f7a6e5649b1d18f4697fdaa41cd7f"><img alt="My Broadband Ping - voda connection" src="https://www.thinkbroadband.com/broadband/monitoring/quality/share/thumb/9ff7838a048f7a6e5649b1d18f4697fdaa41cd7f.png" /></a>

or






Many thanks for everyones help means alot

[Ronski]

Just the image is needed but your graph is showing 100% packet loss, which either means the IP address is wrong or more likely your router is not responding to the pings.

Why does my graph show 100% packet loss?
This may be due to firewall settings or because your IP address has changed. If you have a firewall, ensure that it allows ICMP ping. You will also see 100% packet loss if the address we are monitoring is disconnected from the Internet. You can find out how to configure your router or firewall using our router setup guides.

[jelv]

Almost certain your modem isn't responding to pings. It should look something like this:

[tiffy]

Almost certain your modem isn't responding to pings.

Just corrected this on my Xyxel VMG3925-B10B modem:
Remote Management/WAN Ping/Enable
BQM had been operating on my previous Zyxel VMG1312-B10A modem/router setup but had forgot to enable on the 3925 router after migrating to a bridge setup.

There will quite possibly be a similar parameter on the router in question which requires enabling.

[gycuk1]

Hi Everyone,

Thanks for the advise i have turned on Respond to Ping on Internet Port on my router (XR700) i hope this is correct?
do i need to repost the graphs say tommorow?

thanks again

Jon

[tiffy]

Hi Everyone,

Thanks for the advise i have turned on Respond to Ping on Internet Port on my router (XR700) i hope this is correct?
do i need to repost the graphs say tommorow?

thanks again

Jon

If your BQM graph changes to (mostly) green, charting your latency as per pic supplied by jelv then all's well, should see this start to happen quite quickly migrating from the right hand side of the window and completely updating over a 24 hour period.

[gycuk1]

If your BQM graph changes to (mostly) green, charting your latency as per pic supplied by jelv then all's well, should see this start to happen quite quickly migrating from the right hand side of the window and completely updating over a 24 hour period.

i have a couple of yellow bits are these ok?

[Ronski]

He posted a live graph last time, so far it's looking good, you'll get yellow spikes when using the connection.

[jelv]

That looks perfectly normal.

What ping are you getting at the moment? If it is slow is that using a wired or wireless connection?

[gycuk1]

That looks perfectly normal.

What ping are you getting at the moment? If it is slow is that using a wired or wireless connection?

42 on a wired this morning it was i think 140

[jelv]

We need to know the ping at particular times so that we can compare it to the graph.

[gycuk1]

Hi
BT wholesale says 27ping which is very good for us

[jelv]

42 on a wired this morning it was i think 140

What did you use to get these figures?

[jelv]

Still looking absolutely perfect with no sign of any latency issues!

[gycuk1]

What did you use to get these figures?

HI i get them from https://speedtest.btwholesale.com/details


so should i not be worried about the high ping from above?