Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[zvirus]

Static IP - never got it work - tested million times
PPPoe
PPTP
LT2P

[mrk26]

Choose PPoE and show other screenshot.

[zvirus]

Choose PPoE and show other screenshot.

It will ask me for user name and password...

I dont need that with TalkTalk...

[mrk26]

That's fine, but also there are different options which are in instructions. If you setup modem in bridge, authentication going from router. If there is no user name and password required leave it empty, and see if you can setup other options as per instruction.

[zvirus]

THANK YOU!

I`ll try it...

Cheers!

[mrk26]

Also believe that you should setup VLAN id in modem so router don't have to do it.

[hushcoden]

I used an Asus router a while ago connected to a VMG1312-B10A in bridge mode and I was able to configure it following the guide here: https://kitz.co.uk/routers/zyxel_VMG8324-B10A_bridge.htm

So, in your case you must be doing something 'different' if you cannot make it work...

Besides, while playing around with the Asus router with Merlin firmware, I found out that for 1-cable solution all I needed was to add a script named wan-start to /jffs/scripts folder as follow (no iptables required):

Code: [Select]

#!/bin/sh
sleep 20s
ifconfig $(nvram get wan0_ifname):0 192.168.2.2 netmask 255.255.255.0

and 192.168.2.1 was my modem IP address

Cheers.

[Weaver]