Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2]

Author Topic: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?  (Read 3069 times)

bogof

  • Reg Member
  • ***
  • Posts: 436
Re: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?
« Reply #15 on: May 16, 2020, 03:45:41 PM »

Sorry, I'm not aware of anything.  :no:
Thanks, if I get bored I'll think about making something...

-----

I rebooted a couple of days ago and lost the bump to 14xxxxxx, dropping back down to 12xxxxxx at 6dB.

Today I notice I'm still at 12xxxxxx but the attainable went up to 14xxxxxx and the Far SNR is up to 8dB.


Code: [Select]
vdsl status
  ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
   Running Mode            :      17A       State                : SHOWTIME
   DS Actual Rate          : 79995000 bps   US Actual Rate       : 12306000 bps
   DS Attainable Rate      : 98754312 bps   US Attainable Rate   : 14678310 bps
   DS Path Mode            :        Fast    US Path Mode         :        Fast
   DS Interleave Depth     :        1       US Interleave Depth  :        1
   NE Current Attenuation  :        9 dB    Cur SNR Margin       :        6  dB
   DS actual PSD           :    -1.-7 dB    US actual PSD        :    -1.-6  dB
   NE CRC Count            :       33       FE CRC Count         :      419
   NE ES Count             :       30       FE  ES Count         :      304
   Xdsl Reset Times        :        0       Xdsl Link  Times     :       10
   ITU Version[0]          : fe004452       ITU Version[1]       : 41590000
   VDSL Firmware Version   : 05-07-06-0D-01-07   [with Vectoring support]
   Power Management Mode   : DSL_G997_PMS_L0
   Test Mode               : DISABLE
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :        7 dB    Far SNR Margin       :        8  dB
   CO ITU Version[0]       : b5004946       CO ITU Version[1]    : 544eb206
   DSLAM CHIPSET VENDOR    : < IFTN >

A DSL  reboot beckons, and now I have the 14xxxxxx with 6dB far SNR:

Code: [Select]
vdsl status
  ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
   Running Mode            :      17A       State                : SHOWTIME
   DS Actual Rate          : 79995000 bps   US Actual Rate       : 14583000 bps
   DS Attainable Rate      : 98681864 bps   US Attainable Rate   : 14665850 bps
   DS Path Mode            :        Fast    US Path Mode         :        Fast
   DS Interleave Depth     :        1       US Interleave Depth  :        1
   NE Current Attenuation  :        9 dB    Cur SNR Margin       :        6  dB
   DS actual PSD           :    -1.-7 dB    US actual PSD        :    -1.-6  dB
   NE CRC Count            :        0       FE CRC Count         :      419
   NE ES Count             :        0       FE  ES Count         :      304
   Xdsl Reset Times        :        0       Xdsl Link  Times     :       11
   ITU Version[0]          : fe004452       ITU Version[1]       : 41590000
   VDSL Firmware Version   : 05-07-06-0D-01-07   [with Vectoring support]
   Power Management Mode   : DSL_G997_PMS_L0
   Test Mode               : DISABLE
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :        7 dB    Far SNR Margin       :        6  dB
   CO ITU Version[0]       : 00000000       CO ITU Version[1]    : 00000000
   DSLAM CHIPSET VENDOR    : < unknown >

See how long it sticks for!
Logged

bogof

  • Reg Member
  • ***
  • Posts: 436
Re: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?
« Reply #16 on: June 13, 2020, 10:23:40 AM »

Something has very significantly improved on my line...
Today I was greeted in the modem by a claimed max upstream of 25meg and 14dB SNR.

Code: [Select]
vdsl status
  ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
   Running Mode            :      17A       State                : SHOWTIME
   DS Actual Rate          : 79995000 bps   US Actual Rate       : 14355000 bps
   DS Attainable Rate      : 91586600 bps   US Attainable Rate   : 25592010 bps
   DS Path Mode            :        Fast    US Path Mode         :        Fast
   DS Interleave Depth     :        1       US Interleave Depth  :        1
   NE Current Attenuation  :       10 dB    Cur SNR Margin       :        4  dB
   DS actual PSD           :    -1.-4 dB    US actual PSD        :    -1.-3  dB
   NE CRC Count            :      153       FE CRC Count         :     1505
   NE ES Count             :      141       FE  ES Count         :     1287
   Xdsl Reset Times        :        0       Xdsl Link  Times     :       12
   ITU Version[0]          : fe004452       ITU Version[1]       : 41590000
   VDSL Firmware Version   : 05-07-06-0D-01-07   [with Vectoring support]
   Power Management Mode   : DSL_G997_PMS_L0
   Test Mode               : DISABLE
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :        7 dB    Far SNR Margin       :       14  dB
   CO ITU Version[0]       : b5004946       CO ITU Version[1]    : 544eb206
   DSLAM CHIPSET VENDOR    : < IFTN >
> vdsl status more
vdsl status more
  ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
                  Near End        Far End    Note
 Trellis      :      1               1
 Bitswap      :      1               1
 ReTxEnable   :      0               0
 VirtualNoise :      0               0
 20BitSupport :      0               0
 LatencyPath  :      0               0
 LOS          :      2               0
 LOF          :      0               0
 LPR          :      0               0
 LOM          :      0               0
 SosSuccess   :      0               0
 NCD          :      0               0
 LCD          :      0               0
 FECS         :   2758            26313 (seconds)
 ES           :    141            1287 (seconds)
 SES          :      0              13 (seconds)
 LOSS         :      0              54 (seconds)
 UAS          :     40             397 (seconds)
 HECError     :      0               0
 CRC          :    153            1505
 RsCorrection :      0               0
 INP          :      0               0 (symbols)
 InterleaveDelay :      0               0 (1/100 ms)
 NFEC         :    255             255
 RFEC         :     16              16
 LSYMB        :   3850            21451
 INTLVBLOCK   :    255             255
 AELEM        :      0            ----

A swift modem reboot later and I'm at full whack:
Code: [Select]
vdsl status
  ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
   Running Mode            :      17A       State                : SHOWTIME
   DS Actual Rate          : 79995000 bps   US Actual Rate       : 20000000 bps
   DS Attainable Rate      : 92278328 bps   US Attainable Rate   : 25681007 bps
   DS Path Mode            :        Fast    US Path Mode         :        Fast
   DS Interleave Depth     :        1       US Interleave Depth  :        1
   NE Current Attenuation  :       10 dB    Cur SNR Margin       :        4  dB
   DS actual PSD           :    -2.-9 dB    US actual PSD        :    -2.-7  dB
   NE CRC Count            :        0       FE CRC Count         :     1505
   NE ES Count             :        0       FE  ES Count         :     1287
   Xdsl Reset Times        :        0       Xdsl Link  Times     :       13
   ITU Version[0]          : fe004452       ITU Version[1]       : 41590000
   VDSL Firmware Version   : 05-07-06-0D-01-07   [with Vectoring support]
   Power Management Mode   : DSL_G997_PMS_L0
   Test Mode               : DISABLE
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :        7 dB    Far SNR Margin       :        9  dB
   CO ITU Version[0]       : b5004946       CO ITU Version[1]    : 544eb206
   DSLAM CHIPSET VENDOR    : < IFTN >
> vdsl status more
vdsl status more
  ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
                  Near End        Far End    Note
 Trellis      :      1               1
 Bitswap      :      0               0
 ReTxEnable   :      0               0
 VirtualNoise :      0               0
 20BitSupport :      0               0
 LatencyPath  :      0               0
 LOS          :      2               0
 LOF          :      0               0
 LPR          :      0               0
 LOM          :      0               0
 SosSuccess   :      0               0
 NCD          :      0               0
 LCD          :      0               0
 FECS         :      0            26313 (seconds)
 ES           :      0            1287 (seconds)
 SES          :      0              13 (seconds)
 LOSS         :      0              61 (seconds)
 UAS          :     40             437 (seconds)
 HECError     :      0               0
 CRC          :      0            1505
 RsCorrection :      0               0
 INP          :      0               0 (symbols)
 InterleaveDelay :      0               0 (1/100 ms)
 NFEC         :    255             255
 RFEC         :     16              16
 LSYMB        :   5410            21451
 INTLVBLOCK   :    255             255
 AELEM        :      0            ----

Would love to know what improved...
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?
« Reply #17 on: June 13, 2020, 05:27:31 PM »

I suspect you will have to file that under the heading of "one of life's little mysteries".  :)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

bogof

  • Reg Member
  • ***
  • Posts: 436
Re: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?
« Reply #18 on: June 13, 2020, 06:53:07 PM »

I guess so.  Maybe something has dried out with the recent bit of warm weather.   
Roll on FTTP! :)
Logged

mofa2020

  • Reg Member
  • ***
  • Posts: 317
Re: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?
« Reply #19 on: June 13, 2020, 07:24:12 PM »

But if the download SNRm @ 4dB which suggests 3dB SNRm profile got applied, why did the download attainable speed decrease from 98mbps @ 6dB to ~91-92mbps @ 4dB? it should increase, isn't it?
« Last Edit: June 13, 2020, 08:18:41 PM by mofa2020 »
Logged

Alex Atkin UK

  • Addicted Kitizen
  • *****
  • Posts: 5285
    • Thinkbroadband Quality Monitors
Re: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?
« Reply #20 on: June 13, 2020, 09:57:40 PM »

But if the download SNRm @ 4dB which suggests 3dB SNRm profile got applied, why did the download attainable speed decrease from 98mbps @ 6dB to ~91-92mbps @ 4dB? it should increase, isn't it?

From what I've seen, I don't think attainable can be trusted when below 6dB SNRm, it seems to go a bit crazy.

Like how my line is banded but it makes zero sense I would sync any higher if it wasn't, given my SNR.

Code: [Select]
Data Rate: 73.993 Mb/s / 20.000 Mb/s
Max. Attainable Data Rate (ATTNDR): 77.092 Mb/s / 23.673 Mb/s
Latency: 0.0 ms / 0.0 ms
Line Attenuation (LATN): 12.9 dB / 15.5 dB
Signal Attenuation (SATN): 12.9 dB / 15.4 dB
Noise Margin (SNR): 3.1 dB / 8.3 dB
Aggregate Transmit Power(ACTATP): 6.5 dB / 14.6 dB
Logged
Broadband: Zen Full Fibre 900 + Three 5G Routers: pfSense (Intel N100) + Huawei CPE Pro 2 H122-373 WiFi: Zyxel NWA210AX
Switches: Netgear MS510TXUP, Netgear MS510TXPP, Netgear GS110EMX My Broadband History & Ping Monitors

mofa2020

  • Reg Member
  • ***
  • Posts: 317
Re: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?
« Reply #21 on: June 13, 2020, 11:04:28 PM »

Ah, I see that makes sense.. Thank you for explaining  :thumbs:
Logged

bogof

  • Reg Member
  • ***
  • Posts: 436
Re: FTTC Line Repaired but No DLM Reset, Upstream Still Impacted - Why?
« Reply #22 on: June 13, 2020, 11:05:41 PM »

I think the -~3dB down SNR margin may have been as a result of me fiddling with my modem parameters while I was trying to work out what was going on with the upstream; I'd set "vdsl snr -50" which I guess set a target margin of only 1dB (eek).  I've backed it off to "vdsl snr -30" which is still over 85mbps.
If I have it set to 6dB with "vdsl snr 0" then it maxes out around 75mbps. 
Logged
Pages: 1 [2]