Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2]

Author Topic: Speed Capping Worked  (Read 874 times)

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 3619
Re: Speed Capping Worked
« Reply #15 on: March 21, 2020, 08:34:49 AM »

But I'm sure online gaming uses upstream rather than downstream for sending data. I could be wrong but  :shrug2:

Everything uses upstream for sending, downstream for receiving, there's always a two way conversation going on, just more data will pass in one direction compared to the other depending on what you are doing.
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D

nfxcr3w

  • Member
  • **
  • Posts: 98
Re: Speed Capping Worked
« Reply #16 on: March 21, 2020, 09:19:24 AM »

Everything uses upstream for sending, downstream for receiving, there's always a two way conversation going on, just more data will pass in one direction compared to the other depending on what you are doing.

I Got you I always was told different.
Logged
BT FTTC @3db 80/20 Zyxel VMG1312-B10A bridged + 1508 MTU + OpenWrt 19.07.2 Huawei Cab

nfxcr3w

  • Member
  • **
  • Posts: 98
Re: Speed Capping Worked
« Reply #17 on: March 21, 2020, 09:22:26 AM »

DLM is working quickly now but for some reason G. INP got put on the upstream must of seen all those errors also increased upstream snr margin too speed is still good though. Shouldn't the vmg1312-b10a have a noise filter in it to help with it?

xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:   1
Last initialization procedure status:   0
Max:   Upstream rate = 27342 Kbps, Downstream rate = 81502 Kbps
Bearer:   0, Upstream rate = 20000 Kbps, Downstream rate = 80000 Kbps
Bearer:   1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State:   L0
Mode:         VDSL2 Annex B
VDSL2 Profile:      Profile 17a
TPS-TC:         PTM Mode(0x0)
Trellis:      U:ON /D:ON
Line Status:      No Defect
Training Status:   Showtime
      Down      Up
SNR (dB):    3.4       10.3
Attn(dB):    12.8       0.0
Pwr(dBm):    12.5       0.2

         VDSL2 framing
         Bearer 0
MSGc:      -6      -6
B:      203      97
M:      1      1
T:      0      0
R:      10      8
S:      0.0000      0.0000
L:      21153      5457
D:      8      8
I:      214      106
N:      214      106
Q:      8      8
V:      5      2
RxQueue:      76      40
TxQueue:      19      10
G.INP Framing:      18      18
G.INP lookback:      19      10
RRC bits:      24      24
         Bearer 1
MSGc:      186      58
B:      0      0
M:      2      2
T:      2      2
R:      16      16
S:      5.3333      16.0000
L:      48      16
D:      3      1
I:      32      32
N:      32      32
Q:      0      0
V:      0      0
RxQueue:      0      0
TxQueue:      0      0
G.INP Framing:      0      0
G.INP lookback:      0      0
RRC bits:      0      0

         Counters
         Bearer 0
OHF:      0      0
OHFErr:      0      0
RS:      636846912      2339128
RSCorr:      539      230
RSUnCorr:   0      0
         Bearer 1
OHF:      805416      808691
OHFErr:      0      0
RS:      9664249      3234767
RSCorr:      2      5
RSUnCorr:   0      0

         Retransmit Counters
rtx_tx:      281388      27
rtx_c:      104965      27
rtx_uc:      135553      0

         G.INP Counters
LEFTRS:      919      0
minEFTR:   79983      19997
errFreeBits:   690928822      3945472

         Bearer 0
HEC:      0      0
OCD:      0      0
LCD:      0      0
Total Cells:   1990299647      0
Data Cells:   1622498      0
Drop Cells:   0
Bit Errors:   0      0

         Bearer 1
HEC:      0      0
OCD:      0      0
LCD:      0      0
Total Cells:   0      0
Data Cells:   0      0
Drop Cells:   0
Bit Errors:   0      0

ES:      22      19780
SES:      22      2
UAS:      105      83
AS:      12939

         Bearer 0
INP:      48.00      48.00
INPRein:   0.00      0.00
delay:      0      0
PER:      0.00      0.00
OR:      0.01      0.01
AgR:      80344.32   20102.08

         Bearer 1
INP:      4.00      4.00
INPRein:   4.00      4.00
delay:      3      0
PER:      16.06      16.06
OR:      95.62      31.87
AgR:      95.62   31.87

Bitswap:   1411/1411      83/83

Total time = 3 days 8 hours 18 min 34 sec
FEC:      3088857      230
CRC:      1147      28705
ES:      22      19780
SES:      22      2
UAS:      105      83
LOS:      2      0
LOF:      15      0
LOM:      0      0
Latest 15 minutes time = 3 min 34 sec
FEC:      3      0
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Previous 15 minutes time = 15 min 0 sec
FEC:      28      22
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Latest 1 day time = 8 hours 18 min 34 sec
FEC:      242031      230
CRC:      571      9465
ES:      11      6677
SES:      11      0
UAS:      39      28
LOS:      1      0
LOF:      8      0
LOM:      0      0
Previous 1 day time = 24 hours 0 sec
FEC:      2075611      0
CRC:      0      18628
ES:      0      12637
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Since Link time = 3 hours 35 min 39 sec
FEC:      539      230
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0
Logged
BT FTTC @3db 80/20 Zyxel VMG1312-B10A bridged + 1508 MTU + OpenWrt 19.07.2 Huawei Cab

nfxcr3w

  • Member
  • **
  • Posts: 98
Re: Speed Capping Worked
« Reply #18 on: March 21, 2020, 09:54:24 AM »

Here's the Graphs of the FEC & CRC's

FEC Errors


CRC Errors
Logged
BT FTTC @3db 80/20 Zyxel VMG1312-B10A bridged + 1508 MTU + OpenWrt 19.07.2 Huawei Cab

johnson

  • Reg Member
  • ***
  • Posts: 780
Re: Speed Capping Worked
« Reply #19 on: March 21, 2020, 10:30:50 AM »

That is a LOT of upstream CRCs and errored seconds, not surprised upstream G.INP was enabled.
Logged

nfxcr3w

  • Member
  • **
  • Posts: 98
Re: Speed Capping Worked
« Reply #20 on: March 21, 2020, 10:53:08 AM »

That is a LOT of upstream CRCs and errored seconds, not surprised upstream G.INP was enabled.

Do you know what is causing it John?
Logged
BT FTTC @3db 80/20 Zyxel VMG1312-B10A bridged + 1508 MTU + OpenWrt 19.07.2 Huawei Cab

johnson

  • Reg Member
  • ***
  • Posts: 780
Re: Speed Capping Worked
« Reply #21 on: March 21, 2020, 12:15:57 PM »

No clue.

It starting around 6pm might suggest something on a timer? I have regular 6pm disturbances, but none that last longer than a few 30 second time periods of capturing stats.

Is it a regular occurrence?
Logged

nfxcr3w

  • Member
  • **
  • Posts: 98
Re: Speed Capping Worked
« Reply #22 on: March 21, 2020, 12:24:34 PM »

No clue.

It starting around 6pm might suggest something on a timer? I have regular 6pm disturbances, but none that last longer than a few 30 second time periods of capturing stats.

Is it a regular occurrence?

Yeah every night i'm noticing it. I have these shielded twisted pair adsl cables which should stop noise and interference.  https://www.tandyonline.com/electronics/telecoms-dsl/high-speed-rj11-dsl-cable-0-5m.html
Logged
BT FTTC @3db 80/20 Zyxel VMG1312-B10A bridged + 1508 MTU + OpenWrt 19.07.2 Huawei Cab

johnson

  • Reg Member
  • ***
  • Posts: 780
Re: Speed Capping Worked
« Reply #23 on: March 21, 2020, 12:30:54 PM »

Yeah every night i'm noticing it. I have these shielded twisted pair adsl cables which should stop noise and interference.  https://www.tandyonline.com/electronics/telecoms-dsl/high-speed-rj11-dsl-cable-0-5m.html

Thats a nice cable, I certainly have a short twisted cable myself. But there is only so much you can do once the drop cable comes into your house. It could be an AC system or lights coming on anywhere near your house thats generating the noise. Its a nightmare trying to find this type of interference. Assuming you are not near a business that could make this happen, are you aware of neighbours returning (or leaving) at the times it starts?
Logged

nfxcr3w

  • Member
  • **
  • Posts: 98
Re: Speed Capping Worked
« Reply #24 on: March 21, 2020, 12:50:04 PM »

Thats a nice cable, I certainly have a short twisted cable myself. But there is only so much you can do once the drop cable comes into your house. It could be an AC system or lights coming on anywhere near your house thats generating the noise. Its a nightmare trying to find this type of interference. Assuming you are not near a business that could make this happen, are you aware of neighbours returning (or leaving) at the times it starts?

I'm more close to a railway it starts to ease down at around 11pm but during the day that's when it starts. But since this Corona virus started it's got worse since everyone is self isolating now and everyone working from home.
« Last Edit: March 21, 2020, 12:53:38 PM by nfxcr3w »
Logged
BT FTTC @3db 80/20 Zyxel VMG1312-B10A bridged + 1508 MTU + OpenWrt 19.07.2 Huawei Cab
Pages: 1 [2]