Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 7 8 [9] 10

Author Topic: 10 Gb, Dual-WAN, segmented home / home office Setup  (Read 5583 times)

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #120 on: March 29, 2020, 04:33:46 PM »

When ready to move to dual ISPs the UDM Pro will handle it with 2 WAN ports. Then a 10 Gbit Ethernet link to the switch which will, in turn, feed the RAX 120 in access point mode via the 5GBase-T link and the LR optical link to the other switch.

The UDM Pro has a number of copper ports of its own supplying port density there, no need for the 2 Gb LAG, and the office switch will be okay doing LAG detail to a normal GigE switch.

No need for dual ISP networking for the foreseeable though, of course, as no installs are being done within the home.
Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

aesmith

  • Reg Member
  • ***
  • Posts: 997
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #121 on: March 30, 2020, 04:34:45 PM »

Single mode fibre between the two Mikrotik switches?
Logged

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #122 on: March 30, 2020, 10:25:19 PM »

Ya. Single mode Invisilight.
Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #123 on: April 17, 2020, 10:24:06 AM »

Single homed. For obvious reasons a second ONT or ONT replacement isn't happening right now.

Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #124 on: April 17, 2020, 05:57:07 PM »

Putting the router in place there has had the added bonus that there's no need to have external and internal VLANs going across the switch which simplifies things a ton.

The lab box is listed as having 2 interfaces though it actually has 3 and only one of them gets to access the Internet, the others are sink holed.

Anyway that's my network building done. That was not cheap.
Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #125 on: April 19, 2020, 02:54:11 PM »

Various bits of kit migrated to home office. The Harry Potter room now has ONT, switch and WiFi AP and that's all.

The 4 RU cabinet has been moved to the home office where ventilation is better.

All is ready for dual-WAN now as far as the switches go. The switch ports are isolated so that no LAN device sees WAN traffic and, likewise, no WAN port sees anything other than WAN traffic.

Under stairs switch:

0 GE-1 - ONT - 1 GbE
1 SFP-1 - Empty - Future ONT 2
2 SFP-2 - 10Gbase-BX to Office
3 SFP-3 - Empty
4 SFP-4 - 5Gbase-T to WiFi AP

Office switch:

0 GE-1 - Empty - Future WAN 2
1 SFP-1 - UDM Pro WAN - 10G DAC
2 SFP-2 - Server - 10G DAC
3 SFP-3 - 10Gbase-BX to Stairs
4 SFP-4 - UDM Pro LAN - 10G DAC

Security - unless specified connectivity denied:

Stairs:

0 <> 2
1 <> 2
2 <> All
3 <> 2, 4
4 <> 2, 3

Office:

0 <> 3
1 <> 3
2 <> 3, 4
3 <> All
4 <> 2, 3

The UDM Pro has 8 x GbE ports of its own all on a LAN switch. 2 of these are a tagless LAG to the GigE switch in the office, another is connected to the Raspberry Pi on PiHole duties.

Highly not recommended to be done regularly. Hasn't been cheap.
Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

burakkucat

  • Global Moderator
  • Senior Kitizen
  • *
  • Posts: 29449
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #126 on: April 19, 2020, 04:35:17 PM »

Highly not recommended to be done regularly. Hasn't been cheap.

But fun.  ;)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

Weaver

  • Addicted Kitizen
  • *****
  • Posts: 8676
  • Retd sw dev; A&A; 4 × 7km ADSL2; IPv6; Firebrick
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #127 on: April 19, 2020, 05:48:28 PM »

Good for you!

How are you liking the UDM Pro? And how are you finding the wireless throughout?
Logged

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #128 on: April 19, 2020, 08:55:51 PM »

From my phone:

https://www.speedtest.net/my-result/a/5979582922

The UDM is running test software which seems to fix issues. It's okay for right now!
Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #129 on: April 19, 2020, 10:11:07 PM »

But fun.  ;)

Fun isn't the first word that came to mind. It's been far more pleasing relating the trials and tribulations to you guys and letting you enjoy them vicariously than actually doing the work. It was all pretty trivial stuff.

It's done now and in its completed state. Port isolation takes care of things locally on each switch and the respective WANs are using VLAN tagging

Traffic using WiFi goes along the fibre then back again but that's not a big deal. The 10 Gb link is only going to be used for Internet and WiFi and that's going to max out for the foreseeable at perhaps 4 Gbit/s: a gigabit each for the 2 WANs and 2 Gbit/s for the wireless mesh that I'll complete.

Just for your entertainment I can see my Huawei ONT's MAC address on both switches and I can see the Nokia 7750 SR router in the exchange for obvious reasons - it's PPP over Ethernet after all.
Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

Alex Atkin UK

  • Kitizen
  • ****
  • Posts: 1165
    • My Broadband History
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #130 on: April 19, 2020, 10:36:53 PM »

I've kinda soured to Ubiquiti after reading up on them removing the ability to set static DNS overrides by manually editing the config file and the fact I had to turn off the broadcast limiter on my nanoHD as it was erroneously blocking ARP traffic causing an inability to talk from LAN to WiFi clients.
Logged
Exchange: INTAKE (ECI DSLAM) Router: pfSense (i5-7200U) ISP/Modems: Zen (Home Hub 5A running OpenWrt) + Plusnet (VMG-3925-B10B) WiFi: Ubiquiti nanoHD

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #131 on: April 20, 2020, 05:46:37 PM »

Couple of real-time load snapshots of saturating the broadband downstream and also carrying out a LAN transfer - ensured that >1 Gb/s throughput was a thing.

Seems all good.
Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #132 on: April 21, 2020, 10:03:34 AM »

We're done. Thanks for reading.



Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.

psychopomp1

  • Reg Member
  • ***
  • Posts: 266
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #133 on: April 22, 2020, 04:21:46 PM »

That's a Netgear R9000 (X10) in the photo, not a RAX 120  ;)
Logged


FTTP 330/50

CarlT

  • Kitizen
  • ****
  • Posts: 1589
  • Next generation network design and deployment
Re: 10 Gb, Dual-WAN, segmented home / home office Setup
« Reply #134 on: April 22, 2020, 08:17:42 PM »

Couldn't be bothered to change the picture.  :P
Logged
WiFi: Nighthawk® AX12 RAX120 - 5Gb uplink
Routing: Ubiquiti UDM Pro - 10Gb uplink
Switching: 2 * Mikrotik CRS305-1G-4S-IN, 10Gb uplinks, various cheap and cheerful
ONT: Huawei 1+1
Exchange: Wakefield
ISP: BT Full Fibre 900. Yes, BT, I know.
Pages: 1 ... 7 8 [9] 10