Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Copper line test: really weird error message - line 2  (Read 1617 times)

Weaver

  • Senior Kitizen
  • ******
  • Posts: 11459
  • Retd s/w dev; A&A; 4x7km ADSL2 lines; Firebrick
Copper line test: really weird error message - line 2
« on: November 18, 2019, 12:56:47 PM »

I did a copper line test on my line 2 and got the weirdest error message:

Today 12:15:48   BT Test xDSL Copper Test:Fail BTW exchange fault found.Fail BTW exchange fault found. T073:FAULT - Line Tested OK but No Dial Tone Detected

I don’t think I have seen that before. Any ideas?


Background: I had a creepy feeling about the performance of some lines, getting down / up events for no obvious reason and then downstream sync rate just dropped somewhat. A few of these and sync rates are:
Live sync rates:
  #1: down 3136 kbps, up 505 kbps
  #2: down 2902 kbps, up 519 kbps
  #3: down 3180 kbps, up 416 kbps
  #4: down 2960 kbps, up 528 kbps
Logged

aesmith

  • Kitizen
  • ****
  • Posts: 1216
Re: Copper line test: really weird error message - line 2
« Reply #1 on: November 18, 2019, 03:26:11 PM »

I think that's a false alarm, BT tester getting confused on an A&A line with no calls allowed.   Ours gave that message, and A&A ended up switching it back to a normal time temporarily for that reason because OR kept redirecting any call to their exchange people.

In fact I've just found a discussion that I had with them on the very subject, their response ...
Quote
There is nothing to suggest there is an exchange fault, 'fail BTW exchange fault found' is a red herring, it basically means that the test could not draw dial tone from the exchange end. This is a know failure of the exchange test kit on older legacy line cards
Logged

Black Sheep

  • Helpful
  • Addicted Kitizen
  • *
  • Posts: 5722
Re: Copper line test: really weird error message - line 2
« Reply #2 on: November 18, 2019, 05:09:30 PM »

T-code meaning.
Logged

Weaver

  • Senior Kitizen
  • ******
  • Posts: 11459
  • Retd s/w dev; A&A; 4x7km ADSL2 lines; Firebrick
Re: Copper line test: really weird error message - line 2
« Reply #3 on: February 01, 2020, 02:50:35 PM »

I’ve never had that again. Weirdest thing. I understand that it’s a red herring; I wonder why then and not now? What conditions trigger it?
Logged

aesmith

  • Kitizen
  • ****
  • Posts: 1216
Re: Copper line test: really weird error message - line 2
« Reply #4 on: February 01, 2020, 04:47:05 PM »

I’ve never had that again. Weirdest thing. I understand that it’s a red herring; I wonder why then and not now? What conditions trigger it?
Do you mean it doesn't show that message if you do a copper line test now?  When we had a long running fault A&A had to set our line back almost into a normal line, specifically to avoid that false alarm appearing.  Otherwise they found OR kept re-assigning the fault to an exchange person.
Logged

Weaver

  • Senior Kitizen
  • ******
  • Posts: 11459
  • Retd s/w dev; A&A; 4x7km ADSL2 lines; Firebrick
Re: Copper line test: really weird error message - line 2
« Reply #5 on: February 01, 2020, 04:53:45 PM »

@AESmith - no, it was a one-off. Have never seen it before, nor since.

Our line, so iirc Janet told me, has a recorded message playing on it which is RevK saying something that identifies the line.
Logged