Possibly needs Kitz to reply to this one but I thought the boundaries for ES / day are ES=2880 / 1440 / 720 and Resyncs=20 / 10 / 5 so not sure why the calculator is saying it is amber?
Those are the MTBE parameters for Red. MTBE parameters for Green are 288/144/72.
As mentioned by J0hn, anything in between is Amber and DLM will take no action either way.
The ES figures aren't used at all with G.INP
Openreach wouldn't disclose what error figures they use for G.INP, but when I specifically asked if LEFTRS was used. Interestingly that question was completely glossed over ie not confirmed or denied either way, which based on other conversations I'd had and how they flowed, could be taken to mean that I was close to the mark.
@mw2870. The DLM treats upstream and downstream are treated independently for MTBE, so any upstream errors should not stop the DLM from adjusting your downstream rate.
From your stats:
Max: Upstream rate = 15892 Kbps, Downstream rate = 52948 Kbps
Bearer: 0, Upstream rate = 15892 Kbps, Downstream rate = 44791 Kbps
As also mentioned by J0hn the max attainable rate is inflated due to INP (Interleave & RS encoding). As a
very rough guide, an indication of your max rate without INP is approx halfway between those 2 figures.