Before:Code: [Select]xdslctl info --statsxdslctl: ADSL driver and PHY statusStatus: ShowtimeLast Retrain Reason: 0Last initialization procedure status: 0Max: Upstream rate = 61552 Kbps, Downstream rate = 338781 KbpsBearer: 0, Upstream rate = 50005 Kbps, Downstream rate = 330011 KbpsLink Power State: L0Mode: G.fast Annex ATPS-TC: PTM Mode(0x0)Trellis: U:ON /D:ONLine Status: No DefectTraining Status: Showtime Down UpSNR (dB): 3.6 7.5Attn(dB): 31.0 0.0Pwr(dBm): 0.0 3.9After:Code: [Select]xdslctl info --statsxdslctl: ADSL driver and PHY statusStatus: ShowtimeLast Retrain Reason: 200000Last initialization procedure status: 0Max: Upstream rate = 61789 Kbps, Downstream rate = 344897 KbpsBearer: 0, Upstream rate = 50005 Kbps, Downstream rate = 330011 KbpsLink Power State: L0Mode: G.fast Annex ATPS-TC: PTM Mode(0x0)Trellis: U:ON /D:ONLine Status: No DefectTraining Status: Showtime Down UpSNR (dB): 4.1 7.6Attn(dB): 31.0 0.0Pwr(dBm): 0.0 4.0
xdslctl info --statsxdslctl: ADSL driver and PHY statusStatus: ShowtimeLast Retrain Reason: 0Last initialization procedure status: 0Max: Upstream rate = 61552 Kbps, Downstream rate = 338781 KbpsBearer: 0, Upstream rate = 50005 Kbps, Downstream rate = 330011 KbpsLink Power State: L0Mode: G.fast Annex ATPS-TC: PTM Mode(0x0)Trellis: U:ON /D:ONLine Status: No DefectTraining Status: Showtime Down UpSNR (dB): 3.6 7.5Attn(dB): 31.0 0.0Pwr(dBm): 0.0 3.9
xdslctl info --statsxdslctl: ADSL driver and PHY statusStatus: ShowtimeLast Retrain Reason: 200000Last initialization procedure status: 0Max: Upstream rate = 61789 Kbps, Downstream rate = 344897 KbpsBearer: 0, Upstream rate = 50005 Kbps, Downstream rate = 330011 KbpsLink Power State: L0Mode: G.fast Annex ATPS-TC: PTM Mode(0x0)Trellis: U:ON /D:ONLine Status: No DefectTraining Status: Showtime Down UpSNR (dB): 4.1 7.6Attn(dB): 31.0 0.0Pwr(dBm): 0.0 4.0
Don't mind asked you where can I get these stats from? Is it from Zen sending out fritz!box 7530 to me next few days for free of charge along with Engineer to bring Openreach Modem MT992. Or do I need to buy a G.fast modem same as you?
ZyXEL XMG3927-B50A for these stats. There are a quite a few modems about, but virtually no UK availability as of present.You should be able to access very limited line data on the Zen portal (more information here), but I don't use it.
Pretty stupid of Openreach to hidden these important stats, Bloody BT.
The line data via zen will not show any max rate only the sync rate. Oh well I have emailed AA Isp to see if I can purchase ZyXEL XMG3927-B50A off them, wait and see.
The annoying thing is I believe Zen have access to actual line sync rates, not sure if they get SNR. Last time I spoke to them, I suggested showing them on the customer portal would be useful.
The sync rates reported in the Zen portal seem to differ from actual sync rates. See images below; sync rate reported by the portal for my FTTC line is 67401, as reported by my modem it's 67603. Strange.