Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Sky FTTC - Pfsense setup  (Read 3940 times)

Jon21

  • Reg Member
  • ***
  • Posts: 255
Sky FTTC - Pfsense setup
« on: October 11, 2018, 10:35:00 PM »

So, got my migration date for moving to Sky. See that Sky use MER/DHCP Option 61. I’m being sent a Sky Q Hub which I won’t be using. Is Wireshark still needed to extract the username and password? Or can I use anything@skydsl|password?

The other thing is IPv6. Are there any particular settings required to set it up?
Logged

dee.jay

  • ISP Rep
  • Reg Member
  • *
  • Posts: 953
Re: Sky FTTC - Pfsense setup
« Reply #1 on: October 12, 2018, 07:56:39 AM »

You can indeed just use some fake data in the DHCP client section.

IPv6 I am guessing will the same as my AAISP - you need to modify the LAN configuration to get the IPv6 prefix from WAN.

I am not sure of the exact Sky settings - I never tried to get IPv6 from Sky over pfSense.
Logged
Starlink and AAISP L2TP combo routed by opnSense on proxmox

j0hn

  • Kitizen
  • ****
  • Posts: 4093
Re: Sky FTTC - Pfsense setup
« Reply #2 on: October 12, 2018, 02:41:50 PM »

Quote
IPv6 I am guessing will the same as my AAISP

I'd hope AAISP implemented IPV6 better than Sky many years ago.
IPV6 with Sky isn't static, though it doesn't change as frequent as my current BT IPV6 addresses, which is useless.

I'm switching to Plusnet on Monday. Don't think they do IPV6. Most home users don't need IPV6 anyway.

Wireshark not required for Sky any more.
Logged
Talktalk FTTP 550/75 - Speedtest - BQM

skyeci

  • Kitizen
  • ****
  • Posts: 1383
    • Line stats
Re: Sky FTTC - Pfsense setup
« Reply #3 on: October 12, 2018, 07:25:20 PM »

Sky IPV6 should work fine over pfsense. I have ipv6 with Opnsense no probs.

my ipv6 settings on my wan port are

ipv6 type dhcpv6

dhcpv6 config

tick in request ipv6 prefix only
delegation size 56

ticks in directly send solicit and prevent release (you can leave that one off if you wish though)


Jon21

  • Reg Member
  • ***
  • Posts: 255
Re: Sky FTTC - Pfsense setup
« Reply #4 on: October 12, 2018, 07:26:12 PM »

Thanks dee.jay and j0hn. Did a bit of searching, think these are the most relevant steps for Pfsense:

http://www.skyuser.co.uk/forum/ipv6/58986-sky-ipv6-settings-non-sky-routers-12.html Post #120

http://www.skyuser.co.uk/forum/ipv6/58986-sky-ipv6-settings-non-sky-routers-28.html Post #280

Edit: Thanks as well skyeci.
Logged