Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Can someone check my line  (Read 701 times)

JordanBlack68

  • Member
  • **
  • Posts: 22
Can someone check my line
« on: September 15, 2018, 07:06:09 PM »

Hi all,

Would like a more experienced guy that can explain my line stats to me - like if theres too many errors and that - thanks

Modem has been on for 16 days without a reboot

Code: [Select]
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 25970 Kbps, Downstream rate = 86204 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 4.6 15.1
Attn(dB): 13.9 0.0
Pwr(dBm): 13.1 4.3
VDSL2 framing
Bearer 0
MSGc: -6 26
B: 130 237
M: 1 1
T: 0 42
R: 8 16
S: 0.0518 0.3781
L: 21468 5374
D: 16 1
I: 139 127
N: 139 254
Q: 16 0
V: 14 0
RxQueue: 60 0
TxQueue: 20 0
G.INP Framing: 18 0
G.INP lookback: 20 0
RRC bits: 0 24
Bearer 1
MSGc: 186 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 5.3333 0.0000
L: 48 0
D: 3 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 333829
OHFErr: 0 1339
RS: 1130141232 727089
RSCorr: 270219329 10184
RSUnCorr: 0 0
Bearer 1
OHF: 87817400 0
OHFErr: 0 0
RS: 1053808062 0
RSCorr: 440 0
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 1819053 0
rtx_c: 4374 0
rtx_uc: 0 0

G.INP Counters
LEFTRS: 43 0
minEFTR: 79966 0
errFreeBits: 1721209518 0

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 2260236669 0
Data Cells: 1300867203 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 0 1248
SES: 0 0
UAS: 23 23
AS: 1410613

Bearer 0
INP: 48.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 3.98
OR: 0.01 64.22
AgR: 80614.82 20063.54

Bearer 1
INP: 4.00 0.00
INPRein: 4.00 0.00
delay: 3 0
PER: 16.06 0.01
OR: 95.62 0.01
AgR: 95.62 0.01

Bitswap: 631424/631424 512/512

Total time = 1 days 7 hours 50 min 36 sec
FEC: 270219329 10184
CRC: 0 1339
ES: 0 1248
SES: 0 0
UAS: 23 23
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 5 min 36 sec
FEC: 89 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 197 6
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 7 hours 50 min 36 sec
FEC: 236501 214
CRC: 0 29
ES: 0 27
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 68471 463
CRC: 0 78
ES: 0 70
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 16 days 7 hours 50 min 11 sec
FEC: 270219329 10184
CRC: 0 1339
ES: 0 1248
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Logged

dee.jay

  • Reg Member
  • ***
  • Posts: 387
Re: Can someone check my line
« Reply #1 on: September 15, 2018, 07:41:36 PM »

79999, yup, no problem there.
Logged
Sky FTTC 69/17 @ 3dB SNR - HG612
AAISP FTTC 67/16 @ 3dB SNR - HG612
Routed by pfSense on VMware ESX 6.0
~600M Huawei cabinet

Weaver

  • Addicted Kitizen
  • *****
  • Posts: 7865
  • Retd sw dev; A&A; 4 7km ADSL2; IPv6; Firebrick
Re: Can someone check my line
« Reply #2 on: September 15, 2018, 08:19:00 PM »

Absolutely superb performance, 100%.


And by the way, a very belated welcome to the forum!
Logged

j0hn

  • Kitizen
  • ****
  • Posts: 2634
Re: Can someone check my line
« Reply #3 on: September 16, 2018, 03:49:11 AM »

Line looks great.
Downstream full sync, Retransmission Low. 3dB target SNRM with 1.5dB to spare.
Upstream full sync. No error protection required by DLM as ES are low enough.

In plain English your synced at full speed on the downstream, with G.INP (error protection) and the most efficient throughput profile. Your line is capable of 86Mb so a little to spare in case of crosstalk.

Upstream needs no further added.

Nothing could possibly be better on the DSL side of things.
Logged
Plusnet FTTC 80/20 -  ECI now Huawei cab
retx low @ 3dB target SNRM
Zyxel VMG1312-B10A bridged with 1508 MTU + Asus RT-AC68U running Asuswrt-Merlin
 

anything