So BTOR came and connected the wires to the right house, but not after breaking a few wires and requiring ... !
Good sync speeds and low noise BUT ...
Very high loaded latency (up to 2s) is throttling up/down speeds.
It does it on PlusNets Hub One and my SBG 3300N
The Zyxel has lots of QoS settings - these are mostly focussed on traffic prioritisation, not fancy traffic management algorithm options.
Has anyone else had a similar issue and found a fix?
============================================================================
VDSL Training Status: Showtime
Mode: VDSL2 Annex B
VDSL Profile: Profile 17a
Traffic Type: PTM Mode
Link Uptime: 1 day: 1 hour: 37 minutes
============================================================================
VDSL Port Details Upstream Downstream
Line Rate: 10.031 Mbps 39.999 Mbps
Actual Net Data Rate: 9.997 Mbps 40.000 Mbps
Trellis Coding: ON ON
SNR Margin: 8.9 dB 7.3 dB
Actual Delay: 0 ms 0 ms
Transmit Power: 7.4 dBm 11.5 dBm
Receive Power: -8.1 dBm -13.2 dBm
Actual INP: 0.0 symbols 55.0 symbols
Total Attenuation: 0.0 dB 21.9 dB
Attainable Net Data Rate: 14.712 Mbps 46.244 Mbps
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 8.6 35.3 52.0 N/A 16.7 41.3 63.7
Signal Attenuation(dB): 8.6 34.6 51.1 N/A 21.2 40.9 63.9
SNR Margin(dB): 8.9 8.9 8.9 N/A 7.3 7.3 0.0
Transmit Power(dBm): 0.4 - 8.1 6.3 N/A 7.9 7.7 2.2
============================================================================
VDSL Counters
Downstream Upstream
Since Link time = 37 min 9 sec
FEC: 588096 19
CRC: 0 6
ES: 0 6
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0
Thanks.
