Broadband Related > Router Monitoring Software

draytek v130 & munin for stats via pi3

(1/3) > >>

skyeci:
Just in case there are any V130 users out there interested in stats I have been experimenting with a pi3 and munin. Firstly though I must thank and credit the scripts to a fellow member "smf22" after I contacted him and he helped me with his scripts.

Its nice to be able to see some stats from the v130 as most know it only has one lan port. I had to get opnsense to allow me to see the modem via the wan port but so far its working well. I have found the line to be more stable since swapping over to v130. I like it that you can tweak the SNR values, this has worked well and did increase my DS sync by a few mb, obviously I am not going to push it as stability is preferred over speed for me especially with my troublesome eci cab/line.

The pi3 seems to be coping, you can have a look at some stats http://nedsv130athome.hopto.org  or see an example below. Uptime now for munin nearly a week.

happy to share any info if someone else wants to have a go etc.

burakkucat:

--- Quote from: skyeci on September 01, 2018, 11:34:13 AM ---The pi3 seems to be coping, you can have a look at some stats http://nedsv130athome.hopto.org  . . .

--- End quote ---

Unfortunately I am unable to connect to that address. It just times out and I see a generic "Problem loading page" displayed.

skyeci:
yes sorry. slight technical hitch... the sd card died right at the wrong moment lol . just rebuilding it. won't be much data to look at sadly. typical when I just posted it.  :yuck:

burakkucat:
Some consolation kitteh-treats are on their way to you.  :D

skyeci:
thanks BC  ;D

there is something for you to look at, not much but it's back up..

Navigation

[0] Message Index

[#] Next page