Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 4 5 [6] 7

Author Topic: Openreach engineer has reset DLM to open profile on my line  (Read 18024 times)

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #75 on: October 03, 2018, 01:51:00 AM »

Did force re-sync to get back to maximum sync rate via putty :) at 1:45am as the max rate jump to 89457k and re-sync straight away at 79998K (1K is missing out)

Code: [Select]
adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    0
Last initialization procedure status:   0
Max:    Upstream rate = 27275 Kbps, Downstream rate = 81891 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79998 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State:       L0
Mode:                   VDSL2 Annex B
VDSL2 Profile:          Profile 17a
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        6.5             15.1
Attn(dB):        11.8            0.0
Pwr(dBm):        12.4            0.6

                        VDSL2 framing
                        Bearer 0
MSGc:           -6              26
B:              243             237
M:              1               1
T:              0               42
R:              10              16
S:              0.0971          0.3781
L:              20922           5374
D:              8               1
I:              254             127
N:              254             254
Q:              8               0
V:              0               0
RxQueue:                63              0
TxQueue:                21              0
G.INP Framing:          18              0
G.INP lookback:         21              0
RRC bits:               0               24
                        Bearer 1
MSGc:           186             -6
B:              0               0
M:              2               0
T:              2               0
R:              16              0
S:              5.3333          0.0000
L:              48              0
D:              3               0
I:              32              0
N:              32              0
Q:              0               0
V:              0               0
RxQueue:                0               0
TxQueue:                0               0
G.INP Framing:          0               0
G.INP lookback:         0               0
RRC bits:               0               0

                        Counters
                        Bearer 0
OHF:            0               47148
OHFErr:         0               0
RS:             7671632         1979344
RSCorr:         0               0
RSUnCorr:       0               0
                        Bearer 1
OHF:            11704           0
OHFErr:         0               0
RS:             139704          0
RSCorr:         0               0
RSUnCorr:       0               0

                        Retransmit Counters
rtx_tx:         148962          0
rtx_c:          1380            0
rtx_uc:         0               0

                        G.INP Counters
LEFTRS:         5               0
minEFTR:        79975           0
errFreeBits:    3985498916              0

                        Bearer 0
HEC:            0               0
OCD:            0               0
LCD:            0               0
Total Cells:    28922277                0
Data Cells:     1051            0
Drop Cells:     0
Bit Errors:     0               0

                        Bearer 1
HEC:            0               0
OCD:            0               0
LCD:            0               0
Total Cells:    0               0
Data Cells:     0               0
Drop Cells:     0
Bit Errors:     0               0

ES:             0               318
SES:            0               0
UAS:            192             192
AS:             188

                        Bearer 0
INP:            48.00           0.00
INPRein:        0.00            0.00
delay:          0               0
PER:            0.00            3.98
OR:             0.01            64.22
AgR:            80080.38        20063.54

                        Bearer 1
INP:            4.00            0.00
INPRein:        4.00            0.00
delay:          3               0
PER:            16.06           0.01
OR:             95.62           0.01
AgR:            95.62   0.01

Bitswap:        2/2             1/1

Total time = 4 days 12 hours 23 min 6 sec
FEC:            9402            3267
CRC:            0               567
ES:             0               318
SES:            0               0
UAS:            192             192
LOS:            0               0
LOF:            0               0
LOM:            0               0
Latest 15 minutes time = 8 min 6 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            55              55
LOS:            0               0
LOF:            0               0
LOM:            0               0
Previous 15 minutes time = 15 min 0 sec
FEC:            5               2
CRC:            0               2
ES:             0               1
SES:            0               0
UAS:            109             109
LOS:            0               0
LOF:            0               0
LOM:            0               0
Latest 1 day time = 12 hours 23 min 6 sec
FEC:            900             153
CRC:            0               53
ES:             0               47
SES:            0               0
UAS:            164             164
LOS:            0               0
LOF:            0               0
LOM:            0               0
Previous 1 day time = 24 hours 0 sec
FEC:            884             225
CRC:            0               75
ES:             0               63
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Since Link time = 3 min 7 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
 >

IP Profile for your line is 77.35Mbps :)
« Last Edit: October 03, 2018, 01:53:21 AM by adslmax »
Logged

kitz

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 33879
  • Trinity: Most guys do.
    • http://www.kitz.co.uk
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #76 on: October 03, 2018, 09:33:46 PM »

Now leave it alone.   Don't even look at stats for a while unless something service affecting happens.   
Just enjoy the fact that you have a full 80Mbps line :)
Logged
Please do not PM me with queries for broadband help as I may not be able to respond.
-----
How to get your router line stats :: ADSL Exchange Checker

Weaver

  • Senior Kitizen
  • ******
  • Posts: 11459
  • Retd s/w dev; A&A; 4x7km ADSL2 lines; Firebrick
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #77 on: October 04, 2018, 01:04:06 AM »

> you used to see people running their lines at a ridiculous 1 or 2dB margin.
mea culpa. This is me :-[

But my links never drop now with these good modems, and even if one does, it doesn’t matter, as the other links take over. Also the changeover is now quicker as I have changed the inter-LCP-test speed in the upstream direction, so the router detects the drop sooner now as well as AA detecting it quickly. I never realised it, but you do get even more speed than you might expect with multiple lines as you can get away with lower target SNRM.
Logged

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #78 on: October 04, 2018, 01:15:20 AM »

Now leave it alone.   Don't even look at stats for a while unless something service affecting happens.   
Just enjoy the fact that you have a full 80Mbps line :)

Thanks but I will be away on holiday to St Ives for a week break on Monday. :) Should I switch off modem because never know of power cut etc might trigger DLM
« Last Edit: October 04, 2018, 01:17:37 AM by adslmax »
Logged

re0

  • Reg Member
  • ***
  • Posts: 840
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #79 on: October 04, 2018, 01:21:10 AM »

Just enjoy the fact that you have a full 80Mbps line :)
But it's not full 80 Mbps or 79999 Kbps. It's 79998 Kbps. :D
Logged
ISP: Gigaclear - Hyperfast 900 (up to 940 Mbps symmetrical)

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #80 on: October 04, 2018, 01:22:13 AM »

79999K never get full 80Mbps :)  :P only if the sync rate get it magic number 80000K  :P
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #81 on: October 04, 2018, 01:22:41 AM »

Thanks but I will be away on holiday to St Ives for a week break on Monday. :)

Enjoy the break.

Quote
Should I switch off modem because never know of power cut etc might trigger DLM

Yes, why not? And save the electricity.  ;)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #82 on: October 04, 2018, 01:26:17 AM »

Enjoy the break.

Yes, why not? And save the electricity.  ;)

Thanks will do. I do remember a long while I saw someone post a thread post can't remember if it was at PN forum, TTB forum or BT forum that someone turn off modem and went away on holiday then come back after two weeks away found DLM reduced sync rate from 80Mbps to 60Mbps for no reason because DLM don't like the non-active for more than 7 days? Maybe I shouldn't worry about that?

As for electricity, I wouldn't worry about that, it only cost 35p for 7 days lol
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #83 on: October 04, 2018, 01:34:11 AM »

. . . can't remember if it was at PN forum, TTB forum or BT forum that someone turn off modem and went away on holiday then come back after two weeks away found DLM reduced sync rate from 80Mbps to 60Mbps for no reason because DLM don't like the non-active for more than 7 days?

That reads like something apocryphal. I've never seen any similar reports.

Quote
Maybe I shouldn't worry about that?

In one word: Correct.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

re0

  • Reg Member
  • ***
  • Posts: 840
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #84 on: October 04, 2018, 02:36:03 AM »

If there is no or insufficient DLM data then there is no reason for it to act. :)
Logged
ISP: Gigaclear - Hyperfast 900 (up to 940 Mbps symmetrical)

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #85 on: October 04, 2018, 05:35:03 PM »

If there is no or insufficient DLM data then there is no reason for it to act. :)

Exactly so.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

adslmax

  • Kitizen
  • ****
  • Posts: 1937
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #86 on: October 05, 2018, 10:39:18 AM »

My line has resync to magic number max out at 80000K that never has it before since 2014. SNR also shoot up to 9dB.

Code: [Select]
adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    0
Last initialization procedure status:   0
Max:    Upstream rate = 30290 Kbps, Downstream rate = 92132 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 80000 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State:       L0
Mode:                   VDSL2 Annex B
VDSL2 Profile:          Profile 17a
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        9.2             16.7
Attn(dB):        11.8            0.0
Pwr(dBm):        12.4            0.6

                        VDSL2 framing
                        Bearer 0
MSGc:           -6              26
B:              203             237
M:              1               1
T:              0               42
R:              10              16
S:              0.0809          0.3781
L:              21153           5374
D:              8               1
I:              214             127
N:              214             254
Q:              8               0
V:              5               0
RxQueue:                78              0
TxQueue:                26              0
G.INP Framing:          18              0
G.INP lookback:         26              0
RRC bits:               0               24
                        Bearer 1
MSGc:           186             -6
B:              0               0
M:              2               0
T:              2               0
R:              16              0
S:              5.3333          0.0000
L:              48              0
D:              3               0
I:              32              0
N:              32              0
Q:              0               0
V:              0               0
RxQueue:                0               0
TxQueue:                0               0
G.INP Framing:          0               0
G.INP lookback:         0               0
RRC bits:               0               0

                        Counters
                        Bearer 0
OHF:            0               54187
OHFErr:         0               0
RS:             10683032                2274862
RSCorr:         0               0
RSUnCorr:       0               0
                        Bearer 1
OHF:            13510           0
OHFErr:         0               0
RS:             162116          0
RSCorr:         0               0
RSUnCorr:       0               0

                        Retransmit Counters
rtx_tx:         149547          0
rtx_c:          0               0
rtx_uc:         0               0

                        G.INP Counters
LEFTRS:         0               0
minEFTR:        79983           0
errFreeBits:    264740          0

                        Bearer 0
HEC:            0               0
OCD:            0               0
LCD:            0               0
Total Cells:    33384475                0
Data Cells:     2953            0
Drop Cells:     0
Bit Errors:     0               0

                        Bearer 1
HEC:            0               0
OCD:            0               0
LCD:            0               0
Total Cells:    0               0
Data Cells:     0               0
Drop Cells:     0
Bit Errors:     0               0

ES:             0               0
SES:            0               0
UAS:            0               0
AS:             216

                        Bearer 0
INP:            49.00           0.00
INPRein:        0.00            0.00
delay:          0               0
PER:            0.00            3.98
OR:             0.01            64.22
AgR:            80344.32        20063.54

                        Bearer 1
INP:            4.00            0.00
INPRein:        4.00            0.00
delay:          3               0
PER:            16.06           0.01
OR:             95.62           0.01
AgR:            95.62   0.01

Bitswap:        11/11           0/0

Total time = 3 min 36 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Latest 15 minutes time = 3 min 36 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Previous 15 minutes time = 0 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Latest 1 day time = 3 min 36 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Previous 1 day time = 0 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Since Link time = 3 min 35 sec
FEC:            0               0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
 >

IP Profile for your line is 77.35Mbps
Logged

dee.jay

  • ISP Rep
  • Reg Member
  • *
  • Posts: 952
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #87 on: October 05, 2018, 11:33:14 AM »

Where have you suddenly found another 10Mb of attainable and some spare dB's from?

Interesting.
Logged
Starlink and AAISP L2TP combo routed by opnSense on proxmox

tubaman

  • Senior Kitizen
  • ******
  • Posts: 12507
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #88 on: October 05, 2018, 12:51:32 PM »

Where have you suddenly found another 10Mb of attainable and some spare dB's from?

Interesting.

Perhaps a neighbour has gone on holiday and switched off his router.
 ;)
Logged
BT FTTC 55/10 Huawei Cab - Zyxel VMG8924-B10A

dee.jay

  • ISP Rep
  • Reg Member
  • *
  • Posts: 952
Re: Openreach engineer has reset DLM to open profile on my line
« Reply #89 on: October 05, 2018, 01:11:35 PM »

Must be!
Logged
Starlink and AAISP L2TP combo routed by opnSense on proxmox
Pages: 1 ... 4 5 [6] 7
 

anything