Broadband Related > FTTC and FTTP Issues
Openreach engineer has reset DLM to open profile on my line
adslmax:
I didn't know PN has booked an engineer to turn up at my door this morning to enter my property and he agree to resetted DLM to open profile and told me to leave it on for two days before G.INP get back but he told me bad news that my FTTC cabinet won't get back to 79999K because the cabinet (pcp8) almost nearly filled up. Lucky PN, as I almost going out for the day. I was surprise PN never informed me of an engineer to turn up today. Anyway I did ask the engineer if G.Fast or FTTP ever come to my area for Cuckoo Oak. He say that my area are supposed to be G.Fast this month but Openreach has decided to withdrawnal it because not enough peoples on FTTC in Telford suggest that peoples using Virgin Media cable. For FTTP, there is no chance for Telford, he say.
Here is full stats of open profile for now:
--- Code: ---DLM Resetted (Open Profile for first two days) 21st August 2018 by Openreach Engineer at 11:33am
Connection stats
adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 26797 Kbps, Downstream rate = 80556 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 67526 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.2 15.1
Attn(dB): 12.0 0.0
Pwr(dBm): 12.5 0.9
VDSL2 framing
Bearer 0
MSGc: 18 26
B: 51 237
M: 1 1
T: 64 42
R: 12 16
S: 0.0245 0.3781
L: 20896 5374
D: 1321 1
I: 64 127
N: 64 254
Counters
Bearer 0
OHF: 138477 54774
OHFErr: 0 0
RS: 35450023 2299498
RSCorr: 0 0
RSUnCorr: 0 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 28308888 0
Data Cells: 12256 0
Drop Cells: 0
Bit Errors: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
AS: 218
Bearer 0
INP: 3.00 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 1.57 3.98
OR: 121.96 64.22
AgR: 67647.75 20063.54
Bitswap: 0/0 0/0
Total time = 7 min 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 7 min 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 7 min 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 7 min 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
________________________________________________________________________________________
xDSL
Mode VDSL2
Traffic Type PTM
Status Up
Link Power State L0
Downstream Upstream
Line Coding (Trellis) On On
SNR Margin (dB) 6.2 15.1
Attenuation (dB) 12.0 0.0
Output Power (dBm) 12.5 0.9
Attainable Rate (Kbps) 80556 26797
Rate (Kbps) 67526 19999
B (# of bytes in Mux Data Frame) 51 237
M (# of Mux Data Frames in an RS codeword) 1 1
T (# of Mux Data Frames in an OH sub-frame) 64 42
R (# of redundancy bytes in the RS codeword) 12 16
S (# of data symbols over which the RS code word spans) 0.0245 0.3781
L (# of bits transmitted in each data symbol) 20896 5374
D (interleaver depth) 1321 1
I (interleaver block size in bytes) 64 127
N (RS codeword size) 64 254
Delay (msec) 8 0
INP (DMT symbol) 3.00 0.00
OH Frames 217243 85573
OH Frame Errors 0 0
RS Words 55614255 3611371
RS Correctable Errors 0 0
RS Uncorrectable Errors 0 0
HEC Errors 0 0
OCD Errors 0 0
LCD Errors 0 0
Total Cells 44411191 0
Data Cells 14932 0
Bit Errors 0 0
Total ES 0 0
Total SES 0 0
Total UAS 0 0
________________________________________________________________________________________
Stats recorded 21 Aug 2018 11:33:00
DSLAM type / SW version: BDCM:0xa48c (164.140) / v0xa48c
Modem/router firmware: AnnexA version - A2pv6F039g1.d24m
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 0 hour 7 min 0 sec
Resyncs: 0 (since 21 Aug 2018 11:33:00)
Downstream Upstream
Line attenuation (dB): 12.0 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 67526 19999
SNR margin (dB): 6.2 15.1
Power (dBm): 12.5 0.9
Interleave depth: 1321 1
INP: 3.00 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)
RSCorr/RS (%): 0.0000 0.0000
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 0 0
_________________________________________________________________________________________
80556 26797 Attainable Rate (Kbps)
67526 19999 Sync Rate (Kbps)
6.2 15.1 SNR Margin (dB)
12.0 0.0 Line Attenuation (dB)
12.5 0.9 Output Power (dBm)
1321 1 Interleave Depth
3.00 0.00 INP
Not enabled Not enabled G.INP
5 (VECT_UNCONFIGURED) Vectoring status
Bearer 0
INP: 3.00 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 1.57 3.98
OR: 121.96 64.22
AgR: 67647.75 20063.54
Bitswap: 0/0 0/0
For your connection, the acceptable range of speeds is 40 Mbps-65.36 Mbps
Additional Information:
IP Profile for your line is - 65.36 Mbps
--- End code ---
j0hn:
What did you contact Plusnet about for them to send an engineer?
You had a single resync that was a little lower than usual. Hardly cause for an engineer visit. Not cause to contact your ISP either.
You may get back to 80Mb now though.
DLM should lower your target SNRM to 5dB a few days after applying G.INP.
g3uiss:
Looks like you have interleaving on with INP of 3 and a delay of 8
That’s not what I think you mean by an “open profile”
adslmax:
I never ask Plusnet to send out engineer. They found a fault on the line. They sent off to BT Wholesale yesterday. No one metion me of an engineer to come out or booked in.
adslmax:
--- Quote from: g3uiss on August 21, 2018, 04:30:10 PM ---Looks like you have interleaving on with INP of 3 and a delay of 8
That’s not what I think you mean by an “open profile”
--- End quote ---
Openreach has resetted DLM open profile on his big tool kit (JS2 something) he spend half an hour to resetted everything on DLM.
Navigation
[0] Message Index
[#] Next page
Go to full version