Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: two-time synchronization  (Read 1738 times)

konrado5

  • Reg Member
  • ***
  • Posts: 896
two-time synchronization
« on: July 19, 2018, 04:08:42 PM »

I've noticed my synchronization establishment process is two-time.
Code: [Select]
# adslctl info --show
adslctl: ADSL driver and PHY status
Status: G.994 Training
Last Retrain Reason:    8000
Last initialization procedure status:   0

# adslctl info --show
adslctl: ADSL driver and PHY status
Status: G.992 Started
Last Retrain Reason:    8000
Last initialization procedure status:   0

# adslctl info --show
adslctl: ADSL driver and PHY status
Status: G.922 Channel Analysis
Last Retrain Reason:    8000
Last initialization procedure status:   0

# adslctl info --show
adslctl: ADSL driver and PHY status
Status: G.992 Message Exchange
Last Retrain Reason:    8000
Last initialization procedure status:   0

# adslctl info --show
adslctl: ADSL driver and PHY status
Status: G.994 Training
Last Retrain Reason:    8000
Last initialization procedure status:   3

# adslctl info --show
adslctl: ADSL driver and PHY status
Status: G.992 Started
Last Retrain Reason:    8000
Last initialization procedure status:   3

# adslctl info --show
adslctl: ADSL driver and PHY status
Status: G.922 Channel Analysis
Last Retrain Reason:    8000
Last initialization procedure status:   3

# adslctl info --show
adslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    8000
Last initialization procedure status:   0
Max:    Upstream rate = 1213 Kbps, Downstream rate = 21108 Kbps
Bearer: 0, Upstream rate = 1213 Kbps, Downstream rate = 20931 Kbps

I've also type adslctl info --linediag after first synchronization.

Code: [Select]
# adslctl info --linediag
adslctl: ADSL driver and PHY status
Status: G.994 Training
Last Retrain Reason:    8000
Last initialization procedure status:   3

                Down            Up
SNRM(dB):        3.2             6.0
LATN(dB):        23.0            15.1
SATN(dB):        25.3            14.6
TxPwr(dBm):      19.1            12.0
ATTNDR(Kbps):   21272           1221
After second syncrhonzation process power output is merely 18.6 dBm.

Have somebody noticed something like this? What is cause?
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: two-time synchronization
« Reply #1 on: July 19, 2018, 04:44:02 PM »

In the past, I have performed a similar experiment to that which you have shown and have also recorded evidence of two-attempt synchronisation process. It is a normal event for my circuit and I have never bothered to understand the reason why.

Perhaps a study of the relevant ITU-T G-Series Recommendations may reveal the answer?
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

konrado5

  • Reg Member
  • ***
  • Posts: 896
Re: two-time synchronization
« Reply #2 on: July 19, 2018, 10:51:19 PM »

Retrain reason is 8000 (G992 failure).
http://forum.kitz.co.uk/index.php/topic,12504.0.html
Logged
 

anything