Hi All
Wondering if any of you kind chaps might be able to help me out here.
Currently running a Zyxel VMG3925-B10B in bridge mode (for DSLStats purposes) connected to a Draytek 2860n which handles my PPPoE connection and supplies internet to my wired devices (like using it due to having 6 LAN ports) and a Asus RT-AC86U which handles WiFi devices. I've configure the 2860n with my Hurricane Electric 6in4 IPv6 tunnel, which was working fine when I was using the modem in the 2860n. However, after being stable for a number of months my line seems to be having a few issues lately and want to collect some stats, so decided to use my Zyxel as a bridge modem which would allow me to start collecting stats, and configure the 2860n as a router. Previously I used to use a Billion 8800NL as the bridge modem and that would have no problem with 6in4 IPv6 connectivity, but using the Zyxel won't allow it. I would go back to the 8800NL but our cat, in one of her frenzies, ran behind the sofa where the 8800NL is positioned and somehow managed to break the power socket on it, so I only have the Zyxel to use.
If any one can give me any clues as to why the Zyxel won't allow 6in4 IPv6 traffic through, and if possible, any advice on what I should be looking for and how I can rectify this, I would be very grateful to hear them.
Many thanks in advance