Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: ZTE ZXHN H168N ADSL/VDSL2 modem/router  (Read 5168 times)

jack21

  • Reg Member
  • ***
  • Posts: 131
ZTE ZXHN H168N ADSL/VDSL2 modem/router
« on: June 19, 2015, 06:42:55 PM »

I'd spotted this model being sold by Kikatek some time ago, but they had none left by the time I enquired. Anyway, I found some on eBay this week - new ones from a Hungarian seller at around 28. So ordered one on tuesday, and it arrived today (friday) - speedy service! New, undamaged and well-packed.

After setting it up via its web GUI, perhaps took a little more time than usual, I put it online and was very pleased with the stats.....very slightly down on sync compared to my 8800NL, but even lower error rates. Stats were obtained from a 'Status' web page. Used it online for several hours and was happy with its performance.

However, though I got telnet access and logged in (after some trials) I could not get any useful info from the CLI environment....its shell is unlike any I've previously encountered.......but I will try again now its offline. So I can't yet tell what its chipset is, and I can't yet harvest and graph  its stats with DSLstats (as I do with 8800 or HG612 via a Raspberry Pi).

It is a really nice, compact bit of kit, though, and quite a number of features not commonly seen, especially on such a cheap item. Even if I don't make progress with its stats, it will be a useful backup, or for use where stats harvesting isn't needed.
« Last Edit: June 20, 2015, 10:02:44 AM by jack21 »
Logged

les-70

  • Kitizen
  • ****
  • Posts: 1228
Re: ZTE ZXHN H168N VDSL2 modem/router
« Reply #1 on: June 19, 2015, 07:28:54 PM »

  I looked at a firmware file and I believe it has a broadcom chipset, 63168 I think.  You might try to get super user or root access from the telnet.  That sometimes opens up more commands. 
Logged

roseway

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 39417
  • Penguins CAN fly
    • DSLstats
Re: ZTE ZXHN H168N VDSL2 modem/router
« Reply #2 on: June 19, 2015, 07:35:24 PM »

The only ZTE device I know anything about is the ZXDSL931vII. Getting access to the Busybox shell and the full Broadcom CLI involved a multi-stage login procedure. If you look at the "Special login" page of DSLstats and select the ZTE ZXDSL931vII (near the top of the drop-down list) you'll see the sequence of commands which had to be entered. The second response is the login password which is device dependent.

I don't know if the ZXHN H168N requires the same sort of sequence, or what DSL chipset it uses, but it might be worth exploring.
Logged
  Eric

jack21

  • Reg Member
  • ***
  • Posts: 131
Re: ZTE ZXHN H168N VDSL2 modem/router
« Reply #3 on: June 19, 2015, 08:14:56 PM »

@les-70
Broadcom 61638 chipset  wouldn't surprise me, Les; the stats I could get from the 'Status' page were so similar to those from my 8800.

@roseway
The sequence I'd been following is akin to that I've now seen as you describe, Eric, in DSLstats, except the username and passwords varied.
telnet 192.168.1.1
root
public
enable 
zte          (there is then some limited info to be got at here, but nothing I'm after)
shell
......and then I'm stuck.....it is asking for another login, but every name I try is rejected, never mind getting to another password....then exits from telnet after a few name attempts.
Logged

jack21

  • Reg Member
  • ***
  • Posts: 131
Re: ZTE ZXHN H168N ADSL/VDSL2 modem/router
« Reply #4 on: March 02, 2016, 02:22:10 PM »

Update:

Just for completeness-sake, here's my update on this device:

It did perform almost as well VDSL-wise as the Billion 8800NL but wouldn't work with any stats-monitoring utilities I tried.
Its web-based stats access is passable, but it wouldn't work with Routerstats (unable to logon) , and because I could not get thru its multi-stage telnet login, would not work with DSLstats.

Yesterday I gave it some more attention and managed to achieve progress with stats-monitoring. I wrote a Bash script to gather stats from its recently-discovered-by-me hidden-URL page, then also had the idea of using Routerstats Lite in 'user-defined' mode to get and graph key stats. Both methods work, but the RouterStatsLite was the simplest to achieve. Both techniques are made possible by discovering that if a separate browser is used to connect to the ZTE and display its stats, the other methods don't need to cope with the logon/authentication process demanded by the ZTE, and will continue to harvest stats (their activity keeps the web connection alive).
Logged

mxhelmy

  • Just arrived
  • *
  • Posts: 19
Re: ZTE ZXHN H168N ADSL/VDSL2 modem/router
« Reply #5 on: June 23, 2018, 07:36:57 PM »

Here is a screenshot of the stats from inside the modem, the modem here is the ZTE ZXHN H168N V3.1 which has the Mediatek chip.
So far so good, But I still don't know much about the commands of it, it's the it takes the trendchip style commands like

Code: [Select]
wan vdsl2 set target_snrm 0000
here is a cat /proc/cpuinfo

Code: [Select]
# cat /proc/cpuinfo
system type : Ralink MT751020 SOC
processor : 0
cpu model : MIPS 34Kc V5.5
BogoMIPS : 430.89
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0348, 0x0650, 0x02c0]
ASEs implemented : mips16 dsp mt
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available

processor : 1
cpu model : (null) V5.5
BogoMIPS : 323.58
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0348, 0x0650, 0x02c0]
ASEs implemented : mips16 dsp mt
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available

processor : 2
cpu model : (null) V5.5
BogoMIPS : 323.58
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0348, 0x0650, 0x02c0]
ASEs implemented : mips16 dsp mt
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available

processor : 3
cpu model : (null) V5.5
BogoMIPS : 323.58
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0348, 0x0650, 0x02c0]
ASEs implemented : mips16 dsp mt
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available
« Last Edit: June 23, 2018, 07:51:23 PM by mxhelmy »
Logged
 

anything