So it seemed like a good time for a consolidation post.
These are firmwares based of the latest release from Zyxel, AAJK.16 for the VMG1312-B10A & AAKL.24 for the VMG8924/8324-B10A.
Each folder has several firmware with naming as follows:
-jumboframesPatches applied to allow 1508 byte packets to pass from a router to the modem
in bridge mode. See
this thread for further info.
-oldtelnetIncluding a slightly older version of the telnetd binary that allows multiple concurrent telnet sessions. This is useful if you want to be able to log into your modem while running monitoring software such as DSLStats. Basic comparisons of it with newer versions indicate that the only change made by zyxel was the disallowing of multiple sessions.
-customcmdsA small change to add the execution of a user modifiable script located in the persistent /data partition during boot. This is useful if you wish to add a cap to your line to possibly remove banding/reduce retransmission, in a persistent way that survives reboots. See
this post and thread for more info on reasons to cap. It is also useful if you have an
ADSL line and wish to have persistent storage of changes to your target SNR. Please see
this post for how to add the commands you want.
-x1These firmwares contain a newer version of part of the broadcom DSL driver - adsl_phy.bin. It has been tested by several users and does not seem to offer any speed or stability improvements, however it does seem to fix issues I have personally encountered on a line with
vectoring. If you have vectoring (unlikely unless you live in a
BDUK area) then these versions are worth trying.
-x6As above but including the newer A2pv6F039
x6 adsl_phy.
VMG1312-B10Ahttps://www.dropbox.com/sh/c5no9h8ckyp2i4i/AADwAR6oVbzwFjtE-bLdy81Za?dl=0&lst=VMG8924/8324-B10Ahttps://www.dropbox.com/sh/4xfif7ssq8pdq6u/AAChWy_N8UIVmpqQizmI2CUra?dl=0&lst=They have all been at a minimum tested to boot have the correct changes on my devices, but as always you are flashing at your own risk and having a backup modem is highly recommended.
Edit: Change dropbox view to list
[Moderator edited to add new information from the OP.]