Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[burakkucat]

Per minute, I do believe.

[tiffy]

[Weaver]

@tiffy No, to the johnson easy-stats graphs that are published by the second http server in the modem with custom firmware. As in the title of this thread. I should have said, sorry.

@Burakkucat - to which software were you referring, my friend ? How did you interpret my confusing post?

[tiffy]

@tiffy No, to the johnson easy-stats graphs that are published by the second http server in the modem with custom firmware. As in the title of this thread. I should have said, sorry.

Ahh, apologies for butting in without reading the full thread.

[Weaver]

My fault though Tiffy, as it was very unclear.

[burakkucat]

@Burakkucat - to which software were you referring, my friend ? How did you interpret my confusing post?

Hmm . . . I based my response on the tingles felt in the whiskers whilst thinking about the last time you asked about sampling rates. So I could just be caterwauling nonsense. 

[Weaver]

[Weaver]

Did anyone manage to work out what the story is about the per-time units and the event counts on the main stats summary page eg CRCs ES SES are since-when? Or total of everything, cumulative. Or cumulative since what point. Or per most recent time interval, per-what?

[Weaver]

[Trunkz]

I'm currently running AAXA.7 on a VMG1312-B10D; the current modified firmware is .8 however i believe from posts on here that it should not be used as .8 has issues with ipsec vpns. Does somebody have the .7 or .10 modified firmware with support for MTU1508?

Thanks!

[meritez]

I'm currently running AAXA.7 on a VMG1312-B10D; the current modified firmware is .8 however i believe from posts on here that it should not be used as .8 has issues with ipsec vpns. Does somebody have the .7 or .10 modified firmware with support for MTU1508?

Thanks!

There's a source code copy of AAXA5 for the VMG1312-B10D here: http://datashed.science/misc/bcm/ which has a compiled copy for bridge mode allowing MTU1508, you need to flash the ras.bin from here: http://datashed.science/misc/bcm/firmware/

As the page states, it's untested though there's sourcecode if anyone is willing to setup a docker instance and build it.

[Weaver]

> Did anyone manage to work out what the story is about the per-time units

Our good friend Burakkucat expressed his opinion that the unit time interval is one minute, so eg error count per min etc.  I just missed it earlier in this very thread. Duh. Attempting to blame the drugs is a poor excuse but it is indeed true, amongst other things. And I believe that this is not the first time he has reminded me either. Thanks to Burrakucat once again.

[Trunkz]

There's a source code copy of AAXA5 for the VMG1312-B10D here: http://datashed.science/misc/bcm/ which has a compiled copy for bridge mode allowing MTU1508, you need to flash the ras.bin from here: http://datashed.science/misc/bcm/firmware/

As the page states, it's untested though there's sourcecode if anyone is willing to setup a docker instance and build it.

Thanks for this. The site states a replacement config needs to be applied after the .bin file is flashed as well as manner of hash decription? Is this necessary or can one simply flash the firmware file noted above.

[Weaver]

[Weaver]

The answer was 30 s, not 1 min, as Burakkucat said. Mr Johnson has now done a new release that explicitly states the units: "/ 30s" etc on the y axis.