Hi
Got a quick question, some family members in the house have decided to start re using the treadmill again, and unfortunately it not only driving me mad but also the line. When ever the treadmill is switched and the motor starts turning it creates a tonne of emi noise and internet cuts off and SNR plumets to 0.1db, tonnes of UAS, SES, ES, you name load of errors racking up so in turn line speed reducing soon to be by day. The line was doing so well recently 22399 and at the last stage before banding is removed, based on previous experience. Now someone decided they wanted to use the treadmill and ruin the line and now the sync speed to, great! Has any one else had this issue and how did they go about removing the EMI? I have heard you can get filters you can plug in but not sure if it would make much difference as I used an AM radio on around 600khz to see how much noise it was giving off and the amount of noise from that treadmill is awful. Unfortunately I tried to condemn the treadmill but they was met with a big disagreement so they can still use it. Will probably be back at 18000 sync tomorrow.
Thanks