ok so... I bought myself a nice shiny modem (as above)
plugged is all in, updated firmware to newest (one for BT) , set modem in bridge mode , kept the modems ip at 192.168.2.1 and since my routers IP was the same, i think im supposed to then change that ? so i did , to 192.168.2.2
so now;
Modem IP is 192.168.2.1 - in bridge mode (DHCP is off) (ADSL disabled) (VDSL2 only) (TAG Value 101 Priority 0 - for both Service & Customer)
Router IP is 192.168.2.2
Subnet for both 255.255.255.0
correct so far ?
modem is connected to routers WAN port - correct ?
If this is correct, the router is getting no traffic through the modem ... ?
I cant connect to the modem either while its connected to the WAN port of the router, only when i connect it to a LAN port ?
The modem appears to be connected to the outside world ok, as it showed SHOWTIME and upload and download speeds.
so something else must be wrong in my config on the router ?
can anyone please help me get this modem talking to my router ?
thanks
MODEMROUTER[Moderator edited to correct a typo.]