Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Reason:8000 G992 Failure  (Read 1164 times)

nivek1612

  • Member
  • **
  • Posts: 79
Reason:8000 G992 Failure
« on: November 16, 2017, 12:13:33 PM »

Anyone shed more light on what the above error really means

Saw high FEC spikes just before the resync lost a little speed after resync but line now back to normal in terms of error and FEC levels
Logged
Life is what happens while you're making plans

OPNsense  18.7.* on Qotom  i5-5250U with Zen FTTC 80/20

roseway

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 39564
  • Penguins CAN fly
    • DSLstats
Logged
  Eric

nivek1612

  • Member
  • **
  • Posts: 79
Re: Reason:8000 G992 Failure
« Reply #2 on: November 16, 2017, 12:58:13 PM »

Yes I read most of those but when its starts to say

G992 Failure because of a Tone Ordering Exception

I'm none the wiser

I was hoping for some insight. Maybe I'm just too stupid

No to worry I'll just forget I saw it
Logged
Life is what happens while you're making plans

OPNsense  18.7.* on Qotom  i5-5250U with Zen FTTC 80/20

tbailey2

  • Kitizen
  • ****
  • Posts: 1245
Re: Reason:8000 G992 Failure
« Reply #3 on: November 16, 2017, 01:03:06 PM »

There is a bit of history here....

Reason 8000 I had never found out what it meant but had seen it many times on ADSL lines since MDWS started. Last night while looking for something else I found out that it was for a 'G.992' failure which is the reference for the ADSL system.  So I coded it in. Unfortunately I got it wrong slightly and everyone started getting that message for most failures this morning :-[ I've now fixed it but it may stay like that in some historical references.

HOWEVER in kwiller's case I thought I'd check the upload database and lo and behold  code 8000 WAS what you were uploading as the last retrain reason via DSLstats. So there was something odd going on I guess... Still uploading 8000 currently and will do until the next resync (hopefully) changes it.
« Last Edit: November 16, 2017, 01:32:20 PM by tbailey2 »
Logged
Tony
My Books!
Plusnet 80/20 - DSLstats - HG612/TG582n - ECI

roseway

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 39564
  • Penguins CAN fly
    • DSLstats
Re: Reason:8000 G992 Failure
« Reply #4 on: November 16, 2017, 01:19:25 PM »

If you look in DSLstats at Telnet Data --> Connection Stats, just a few lines from the top there's a line "Last Retrain Reason: ... " which is what your modem is reporting.
Logged
  Eric

nivek1612

  • Member
  • **
  • Posts: 79
Re: Reason:8000 G992 Failure
« Reply #5 on: November 16, 2017, 01:31:33 PM »

thanks all

DSLstats shows the retrain reason as 8000
« Last Edit: November 16, 2017, 01:45:19 PM by kwillers »
Logged
Life is what happens while you're making plans

OPNsense  18.7.* on Qotom  i5-5250U with Zen FTTC 80/20
 

anything