Good Morning. TIM Brazil is also providing the DGA4130 for VDSL and VOIP users,
I performed the unlock procedures and updated the GUI for Ansuel, and I am currently using firmware version 1.1.2.
I was able to configure my PPPoE connection to bridge normally, the problem is that I lost my VOIP settings, and TIM does not provide this information, like the password! I have the SIP server login / server data written before the update, but not the password because it was encrypted in the GUI
I have a backup of the original firmware data (config.bin) where the firmware was
GOLD 17.1
Firmware version 17.1.7882-0001041
Firmware OID 5aa40a66835b67358c78c11e
Bootloader 16.11.1013-0000000-20160314084347-870409210027d7bcfa4d54666160c0bb5322e291
In the current version after root and installation of the Ansuel Guide my firmware has the following data
Product Vendor Technicolor
Product Name DGA (DGA4130)
Software Version AGTEF_1.1.2_004
Gui Version 8.8.77
Hostname modemtim
Datapump Version A2pvfbH043k.d26r
Firmware OID 5b4f7c0c7ba7b510faeeaf0b
Bootloader Version 16.11.1013-0000000-20160314084347-870409210027d7bcfa4d54666160c0bb5322e291
Bootloader OID unofficialbuildOID0000
Hardware Version VBNT-K
I have already tried config.bin data restoration, including updating my modem for several versions (1.0.3, 1.0.4 (Gold 17,1), 1.1.0) but the modem does not accept the config. bin!
Does anyone know how I can use the original's firmware config.bin to retrieve my VOIP / SIP data? Thank you!
If it helps, the header of my config.bin file, I read it through Notepad ++ (the rest I can not read because it's in hexadecimal I believe)
PREAMBLE = THENC
BACKUPVERSION = 1.00
BOARDMNEMONIC = VBNT-K
PRODUCTNAME = DGA
SERIALNUMBER = CP1813UAKDV
MAC = A4: 91: B1: 4C: 6F: 8E
BUILDVERSION = 17.1.7882-0001041-20180310174006-76b2fc98325b644369372da13ac0e3169b846554
CIPHERKEY = GW
SIGNATUREKEY = GW
I tried to post this at the italian forum but I think they are at maitanence right now, I can't register there...
Thank you again in advance