Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[j0hn]

25 is a bigger number than 9

So if....
3.9 is released
then
3.10 is released
then
3.11 is released

so 3.9 is older than 3.25
understand?

edit: oops

[GigabitEthernet]

25 is a bigger number than 9

So if....
3.9 is released
then
3.10 is released
then
3.11 is released

so 3.9 is newer than 3.25
understand?

Well no I don't because roseway above said the opposite!

[roseway]

I think j0hn made a typo, and meant that 3.9 is earlier than 3.25. Just take note of the sequence 3.9, 3.10, 3.11, 3.12....3.24, 3.25, 3.26....

[kitzuser87430]

I think of it as 3.09  not 3.9

[j0hn]

I think j0hn made a typo, and meant that 3.9 is earlier than 3.25

I did indeed.

I think of it as 3.09  not 3.9

This is how I think of it, but thought I would confuse the matter. Then I wrote the opposite of what I meant to anyway 

[lofgents]

The best source for the VOIP configuration is here :
https://www.crc.id.au/hacking-the-technicolor-tg799vac-and-unlocking-features/
go to the Configure a third party SIP provider section.
i just had to edit this file a little : /etc/config/mmpbxrvsipnet
and it worked like a charm...

By edit do you mean you just telnet this to the 4130

I have tried various ways of inputing into the phone number area for the sips set up. Which is the correct way. For example the page shows.

First field is username so tried +******@****.****.net (AS my username appears in my isp provided modem.

Second field is URL so tries ****.****.net also tried phone number in there.

Third field is password which I know is correct as I had to obtain it from my isp and input into their modem. This also shows in the first page of the telephone tab accessed from the Gui.

I am probably missing something could you clarify what information goes in what field also on the first page it shows I think from memory a field with primary registration and then port 5060 (I believe this is correct for my isp) so should something be typed into that field.

Thanks for any help you can offer would like to get this working as it syncs much better than my present modem, also shame it keeps dropping the line when I have it connected via the ethernet port as that is asimple solution.

[shdf]

i use Winscp to get the file from the modem, edit it with notepad++, and send it back to its place with winscp.

All i had to do is to follow the instruction in the link. But maybe things vary with some ISP.

My SIP parameters are (i changed some numbers  ):
  Phone number : 0033448150311
  Login / User name       : 0033448150311
  Password            : xxxxxxxx
  Authorization user name : 0033448150311
  Domain / Registrar      : sip3.ovh.fr

As you can see the phone number, the username, and authorisation name are all the same so it could be confusing to know which parameter you have to insert...Anyway i hope it could help you a bit.

This is my configuration file /etc/config/mmpbxrvsipnet.
--------------------------------------------

config mmpbxrvsipnet 'global'
   option trace_level '2'
   option radvision_trace_level '0'

config syslog 'syslog'
   option registration '1'
   option call_signalling '1'
   option syslog_priority '6'
   option hide_user_identity '0'

config network 'sip_net'
   option user_friendly_name 'SIP network'
   option cac '-1'
   option transparent_soc_transmission '0'
   option interface 'wan'
   option local_port '5060'
   option domain_name 'sip3.ovh.fr'
   option primary_registrar_port '5060'
   option secondary_proxy_port '0'
   option transport_type 'UDP'
   option reg_expire '3600'
   option reg_expire_T_before '1'
   option reg_back_off_timeout '60'
   option reg_back_off_timeout_algorithm 'fixed'
   option reg_back_off_timeout_max '900'
   option reg_back_off_timeout_min '600'
   option re_registration_mode 'ims'
   option realm 'sip3.ovh.fr'
   option realm_check '1'
   option 401_407_waiting_time '0'
   option dtmf_relay 'rfc2833'
   option dtmf_relay_translation '0'
   option timer_T1 '500'
   option timer_T2 '4000'
   option timer_T4 '5000'
   option timer_B '32000'
   option timer_D '50000'
   option timer_F '32000'
   option timer_J '32000'
   option provisional_timer '1200'
   option remote_hold_tone_enabled '0'
   option sdp_direction_call_hold 'sendonly'
   option sdp_direction_call_hold_answer 'recvonly'
   option uri_clir_format 'standard'
   option privacy_handling 'apply'
   option rejection_response '486'
   option no_answer_response '480'
   option call_waiting_provisional_response '180'
   option call_waiting_reject_response '486'
   option reliable_provisional_response 'when_supported'
   option forking_mode 'replace'
   option ingress_media_timeout '1000'
   option session_timer 'disabled'
   option min_session_expires '90'
   option session_expires '180'
   option fail_behaviour 'stop'
   option min_period_proxy_redundancy '0'
   option escape_hash '1'
   option escape_star '0'
   option control_qos_field 'dscp'
   option control_qos_value '40'
   option realtime_qos_field 'dscp'
   option realtime_qos_value '40'
   option from_anonymous_handling 'withheld'
   option sip_over_ipv6 '0'
   option rtp_local_port_min '32000'
   option rtp_local_port_max '39999'
   option user_param_value 'phone'
   option include_sip_instance '1'
   option waiting_time_for_registration_on_400_or_503_response '60'
   option hide_serial_number '0'
   option use_domain_in_contact '1'
   option use_domain_in_via '0'
   option update_support '1'
   option sdp_direction_attribute_media_level_only '1'
   option registration_delay '5'
   option enable_re_register_on_cancel_timeout '1'
   option rport_in_via '1'
   option optimized_authentication '1'
   option repeat_ringing_interval '0'
   option re_register_on_403 '0'
   option check_ttl_for_dns_record '1'
   option dns_query_timeout '5000'
   option sip_message_max_size '4096'
   option conference_release_call_after_transfer '0'
   option disconnect_on_bye_response '1'
   option cancel_invite_timer '64000'
   option early_media_detection '0'
   option user_agent 'Technicolor / VBNT-K / AGTEF_1.0.3 / AGTEF_1.0.3'
   option primary_registrar 'sip3.ovh.fr'
   option primary_proxy_port '5060'
   option primary_proxy 'sip3.ovh.fr'

config profile 'sip_profile_0'
   option network 'sip_net'
   option password 'xxxxxxxx'
   option uri '0033448150311'
   option enabled '1'
   option user_name '0033448150311'

------------------------------------------

Once the file is edited you have to type this command for the changes to take effect :
/etc/init.d/mmpbxd restart

[kitzuser87430]

3.9 refers to the GUI, not the modem firmware. Changing it doesn't affect your DSL performance at all, and now you have 3.9 you can safely upgrade the GUI while the modem is connected to the internet. I suggest version 3.25. Version 3.36 is the latest, but it has a bug which may result in loss of DNS. This can be fixed with a little mild hacking.

I am not having much luck with this device; unloacked Okay, installed 3.25 (the setup wiz would not start), installed 3.36 and now have the DNS problem.

what hacking do I have to do to fix this?

I did try editing the /tmp/resolv.conf but on restarting dnsmasq it rewrites the file.

Thanks in advance

Ian

[roseway]

The solution was given in the italian forum link which shdf gave above. If you put it through Google Translate it all becomes clear. But in short, you have to edit the file /etc/config/dhcp and remove the line option dhcpv4 'server' from the section config dhcp 'lan'

[shdf]

when you see a strange behaviour of your modem after an update, just reboot the modem, it will save you from tearing all your hair. 

[Ozymandias]

Does anyone know what the difference is between the CLOSED and DUMMY versions of a given release of firmware?

e.g. AGTEF_1.0.4_CLOSED.rbi and AGTEF_1.0.4_DUMMY.rbi

[shdf]

this question was asked 50x on the italian forum, we never received an aswer...but the one to use is the one with the word CLOSED.

[kitzuser87430]

you have to edit the file /etc/config/dhcp

Thanks, missed that, DHCP currently off and no sign of this line in my /etc/config/dhcp file, will try again in a few days, when I next connect it and turn on dhcp.


I have noticed a GUI bug, the "Internet Access" card becomes unopenable when WAN connection is set to "PPPoa" (my ADSL (g.dmt) connection)

I have confirmed this by editing /etc/config/network ... section .... config interface wan and changing "option proto" from pppoa to pppoe then it works as normal again.

[Ozymandias]

Thanks shdf. I was worried the that I was being stupid and the answer obvious so hesitated asking . 

[shdf]

A few days ago i flashed the firmware 1.0.4, no problem found.
Yesterday i installed the latest GUI 4.5.x and everything seems to be OK too. You can safely update the GUI from the GUI. No reboot required.
If at the end of the process you see an nginx error 500 displayed, don't panic, just open putty and type these 2 commands:
/etc/init.d/transformer restart
/etc/init.d/nginx restart

And voilą 

There are some improvements and new features coming from the Latest Firmware 1.1.0_001
The GUI 4.5.x was tested on firmware 1.0.3 and 1.0.4

At the moment with the version 4.5.10 i don't see any particular bug.

PS:
now you can change the GUI color from the "system extra" tile, there is a GUI skin section.