Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roseway]

I don't think I've ever had a report of DSLstats pausing without it being done manually, and it's difficult to see how it could happen (apart from a gross programming error of course). I think I'd like to put that one aside, unless it happens again.

Thinking again about all those "Implausible..." messages, is it possible that you haven't configured the traffic monitoring properly? This has always been problematical because of the many different ways modems report it. There's some general advice here: http://dslstats.me.uk/trafficconfig.html

If the configuration isn't right it's possible that this would cause DSLstats to misbehave in some way, although this is rather unlikely. It would certainly explain the "Implausible..." messages.

[LordSven]

Good day,
@ r'way: just to thank you for v6.0.11, which is working a treat on win 7 x64. An amazingly useful program. All of your hard work is much appreciated.
Cheers!
LS

[roseway]

Thank you LS

[ssbertilson]

I don't think I've ever had a report of DSLstats pausing without it being done manually, and it's difficult to see how it could happen (apart from a gross programming error of course). I think I'd like to put that one aside, unless it happens again.

My modem took a hit last night and rebooted.  At that time it announced a pause and then apparently was unable to reconnect.  I rebooted after installing an update this morning, so had to restart DSLstats.  Before the restart the Event Log was showing the event, but now that I've restarted it, it is gone...only going back to when I restarted it.  Shouldn't ~/.dslstats/Eventlog0.txt retain past events?

Thinking again about all those "Implausible..." messages, is it possible that you haven't configured the traffic monitoring properly? This has always been problematical because of the many different ways modems report it. There's some general advice here: http://dslstats.me.uk/trafficconfig.html

They only come up periodically (10s of them per day) and the graphs all look great.

[roseway]

Have you got "Save event log on exit" ticked, in the Misc section of Configuration?

[NewtronStar]

The Bitloading on D2 has turned blue this happened before on DSLstats and fixed by turning off the 8924-B10A for 30 minutes it hasn't not worked this time, must be something to do my sync at 40000 Kbps it should be 39999 Kbps on 40/10 service.

Did see someone years ago having the same odd thing happen to them but can't find how they cured it.

Sorry you can move this into DSLstats 6.0.11 thread my mistake - Done - roseway

[roseway]

Are the other tone-related graphs coloured correctly?

[NewtronStar]

I think so U0 green D1 red U1 green D2 blue also the HLOG shows as blue in that band and QLN

[roseway]

DSLstats gets its information for the different bands from the pbParams output. Can you copy the pbParams output here please (from Telnet Data --> pbParams).

[NewtronStar]

Here is a copy of the pbParams

Code: [Select]

xdslctl info --pbParams
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    0
Last initialization procedure status:   0
Max:    Upstream rate = 6191 Kbps, Downstream rate = 44174 Kbps
Bearer: 0, Upstream rate = 6191 Kbps, Downstream rate = 40000 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Discovery Phase (Initial) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
Medley Phase (Final) Band Plan
US: (7,32) (871,1205)
DS: (33,859) (1216,1961) (2793,3099)
                  VDSL Port Details               Upstream                Downstream
Attainable Net Data Rate:            6191 kbps              44174 kbps
Actual Aggregate Tx Power:         -   0.1 dBm               11.7 dBm
====================================================================================
  VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
  Line Attenuation(dB): 8.6 42.7 N/A N/A N/A 19.8 52.4 81.0
Signal Attenuation(dB): 8.6 42.3 N/A N/A N/A 22.0 52.0 100.3
        SNR Margin(dB): 6.0 6.0 N/A N/A N/A 3.9 4.1 4.0
         TX Power(dBm): -11.4 -0.4 N/A N/A N/A 8.7 7.9 0.6
 >

[roseway]

Thank you. I see there's no U2 band but there is a D3 band after it, but with very little data in it. It's possible that you've uncovered a bug here, and of course it might go away the next time you resync. I'll get working on it.

[NewtronStar]

No worry's this has only started to appeared since this line went Huawei XdB and when a retrain happens same with the RPI will update the RPI to 6.0.11 this weekend when BST ends and the clock goes back by 1 hour.

[roseway]

Thanks. I've got a theory, but it needs some more thought.

[ssbertilson]

Have you got "Save event log on exit" ticked, in the Misc section of Configuration?

Thanks, didn't, but do now.

[Korben_dallas]

Hi,

Over the last few days I have been getting error messages on DSLstats 6.0.11 running on my raspberry pi3 in relation to MyDSLWebStats.

On looking at DSLstats it says 'Second Stage Logon Failed' there is a reference to having selected requiring command to enter shell but that the only place I see this is for logon onto the HG612.

I have stopped/started DSLStats and rebooted the pi but still get the error.

As I have email alerting I get an email for MyDSLWebStats Upload Fail and then for it being ok.  The issue seems to be occurring nearly every few minutes.

Any ideas ?