Broadband Related > FTTC and FTTP Issues
Has Vectoring Been Applied to My Circuit?
freelander:
thanks lee111s , i just edited my post above to show this , thanks
GigabitEthernet:
You do indeed have vectoring.
freelander:
thanks
busby:
It's such a black art this VDSL. I have a lower attenuation but a considerably lower speed downstream and upstream. No G.INP or Vectoring, but presumably that's because I'm on an ECI cab at the end of some aluminium cable.
I know this adds nothing to the discussion, just thought I'd reiterate the 'them and us' thing ;)
Stats below -
DSLAM/MSAN type: IFTN:0xb206 / v0xb206
Modem/router firmware: AnnexA version - A2pv6F039g1.d24m
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 3 days 11 hours 1 min 9 sec
Resyncs: 3 (since 12 Aug 2017 17:58:31)
Downstream Upstream
Line attenuation (dB): 23.4 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 32884 4114
SNR margin (dB): 6.2 6.0
Power (dBm): -0.3 -0.3
Interleave depth: 643 1
INP: 3.00 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)
RSCorr/RS (%): 0.4625 0.0036
RSUnCorr/RS (%): 0.0025 0.0000
ES/hour: 1.94 0.06
freelander:
I wish that vectoring had not been enabled, had a steady 43998 for months and now the DLM system has been playing and down now to 28780 with a 19.6snr , had a few restarts yesterday due to thunderstorms and the electric going on and off and just done a manual reboot now , will this pick up on its own
Cheers
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version