Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[banger]

I have just purchased a ZyXEL VMG1312-B10A from Ebay configured for Zen so will have to factory reset it for my TTB/Uno line. But was wondering if anyone is using the above or similar ZyXel model that has MWDS running to I can compare with my TP-Link TD-W9970 graphs on MWDS.

Cheers

[skyeci]

There are 2 uploading to mdws.. have a look under all stats.

One called pmfc and the other dty.

[banger]

There are 2 uploading to mdws.. have a look under all stats.

One called pmfc and the other dty.

Many thanks Mr Skyeci

[burakkucat]

I have just purchased a ZyXEL VMG1312-B10A from Ebay configured for Zen . . .

I thought Zen supplied the ZyXEL VMG1312-B10D . . .  they certainly did so when I purchased the one that I am using.

I know that A&A supply the ZyXEL VMG1312-B10A.

When it is delivered, your first task should be to clear the ROM-D and then install the latest firmware image.

[banger]

It is according to the Ebay description a ZyXEL VMG1312-B10D from Zen. I have just downloaded the latest firmware from the ZyXel site. Is it easy to put into bridge mode as looking at the Manual I cannot see any obvious way. Still studying though.

[j0hn]

Hopefully it is a ZyXEL VMG1312-B10D as I believe that to be the better of the 2 models. Someone can correct me if I got that the wrong way round.

[banger]

Found this https://support.zen.co.uk/kb/Knowledgebase/ZyXEL-VMG1312-VMG8924-Bridge-Mode while browsing now all I need to know is if you can change the router IP for stats collection.

Edit: Found it in the manual, LAN IP setting looks pretty straight forward. Now just to wait for delivery.

[NewtronStar]

I was under the impression the B10D was the budget Chipset and the B10A is the more powerfull chipset, yep it's got a third 3 meaning budget BCM 63381

The third digit, when set to 3 (like in BCM6335, BCM6338) denotes a single-chip and cost-reduction oriented design

[burakkucat]

I was under the impression the B10D was the budget Chipset and the B10A is the more powerfull chipset.

All I know is that the -B10A is the earlier device and the -B10D is the more recent device.

I'll ask my VMG1312-B10D to disclose its SoC --

BusyBox v1.20.1 (2016-10-18 15:41:48 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

$ cat /proc/cpuinfo
system type             : 963381_VMG1312
processor               : 0
cpu model               : Broadcom BMIPS4350 V8.1
BogoMIPS                : 598.01
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
shadow register sets    : 1
kscratch registers      : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

processor               : 1
cpu model               : Broadcom BMIPS4350 V8.1
BogoMIPS                : 606.20
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
shadow register sets    : 1
kscratch registers      : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

$

[NewtronStar]

see my last post it's been updated

[burakkucat]

It is according to the Ebay description a ZyXEL VMG1312-B10D from Zen.

In an earlier post, you wrote --

I have just purchased a ZyXEL VMG1312-B10A from Ebay configured for Zen . . .

Hence my query. 

[burakkucat]

see my last post it's been updated

Thank you for the explanation. Team-work prevails! 

[banger]

It is in fact described as a B10D on the Ebay listing my first post is incorrect.

[NewtronStar]

Thought I would send that command to the 8800NL R1 and BogoMips are way lower than the B10D unless it's CPU is running in idle mode or the B10D CPU is being overclocked


> cat /proc/cpuinfo
system type             : 963168MBV_17AZZ
processor               : 0
cpu model               : Broadcom4350 V8.0
BogoMIPS                : 399.36
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
shadow register sets    : 1
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned exceptions            : 5268881
processor               : 1
cpu model               : Broadcom4350 V8.0
BogoMIPS                : 402.43
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
shadow register sets    : 1
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned exceptions            : 5268881
 >

[vic0239]

Here's my 1312-B10A output

Code: [Select]

> cat /proc/cpuinfo
system type             : 963168VX
processor               : 0
cpu model               : Broadcom4350 V8.0
BogoMIPS                : 398.33
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
shadow register sets    : 1
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned exceptions            : 834636
processor               : 1
cpu model               : Broadcom4350 V8.0
BogoMIPS                : 402.43
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
shadow register sets    : 1
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned exceptions            : 834636

I'm offline at the moment after disabling MDWS upload during the recent issues and then going off on holiday without the means to re-enable. I found the 10A better than the 10D on my lines.