Hi,
I have connected a Draytek 2860n for the first time to my line. A quick look at the line stats and... oh my goodness what a lot of error seconds. Its no wonder DLM is treating me so badly.
So my questions are 1) does DLM act on near or far end error seconds, or both.
2) When will these line stats reset - or are these figures for the last 24 hours - I guess I might find out tomorrow?
Incidentally, far end in Drayteks terms is the exchange / cabinet equipment and near end is your own modem.
I have posted my line stats below. I have just swapped out an Asus DSL-AC68U which put me onto interleaved from years of fast path stability. Looks like the Asus wasn't behaving with 2326 error seconds
vdsl status
---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 59995000 bps US Actual Rate : 19998000 bps
DS Attainable Rate : 77171256 bps US Attainable Rate : 29935000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 1309 US Interleave Depth : 502
NE Current Attenuation : 13 dB Cur SNR Margin : 6 dB
DS actual PSD : 4. 3 dB US actual PSD : 13. 5 dB
NE CRC Count : 0 FE CRC Count : 2726
NE ES Count : 0 FE ES Count : 2326
Xdsl Reset Times : 0 Xdsl Link Times : 1
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 15 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da48c
DSLAM CHIPSET VENDOR : < BDCM >
>