Hi,
I recently got DSLStats functional with the C1100z by using the C1000 Zyxel profile. Everything except 'signal attenuation' is functional. This is the error popping up on the event log...
06 Apr 2017 19:39:50 Timeout while collecting signal attn data
06 Apr 2017 19:39:50 Telnet timeout
06 Apr 2017 19:40:20 Timeout while collecting signal attn data
06 Apr 2017 19:40:20 Telnet timeout
06 Apr 2017 19:40:50 Timeout while collecting signal attn data
06 Apr 2017 19:40:50 Telnet timeout
06 Apr 2017 19:41:20 Timeout while collecting signal attn data
06 Apr 2017 19:41:20 Telnet timeout
06 Apr 2017 19:41:50 Timeout while collecting signal attn data
06 Apr 2017 19:41:50 Telnet timeout
06 Apr 2017 19:42:20 Timeout while collecting signal attn data
06 Apr 2017 19:42:20 Telnet timeout
06 Apr 2017 19:42:50 Timeout while collecting signal attn data
06 Apr 2017 19:42:50 Telnet timeout
06 Apr 2017 19:43:20 Timeout while collecting signal attn data
06 Apr 2017 19:43:20 Telnet timeout
The line is an ADSL2+ Annex A line.
This is the stats tab...
Stats recorded 06 Apr 2017 19:57:48
DSLAM/MSAN type: GSPN:0x0010 / v0x0010
Modem/router firmware: Not reported
DSL mode: ADSL2+
Status: Showtime
Uptime: 2 days 19 hours 1 min 21 sec
Resyncs: 0 (since 06 Apr 2017 19:53:02)
Downstream Upstream
Line attenuation (dB): 18.0 6.2
Signal attenuation (dB): N/A N/A
Connection speed (kbps): 11774 894
SNR margin (dB): 20.3 16.5
Power (dBm): 15.1 8.6
Interleave depth: 1 1
INP: 0 0
G.INP: Not enabled Not enabled
Vectoring status: Not monitored
RSCorr/RS (%): N/A 7.4597
RSUnCorr/RS (%): N/A 0.0000
ES/hour: 0 0
Here's the --stats portion from the modem on telnet...
xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 928 Kbps, Downstream rate = 22640 Kbps
Bearer: 0, Upstream rate = 894 Kbps, Downstream rate = 11774 Kbps
Link Power State: L0
Mode: ADSL2+ Annex A
TPS-TC: ATM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 20.3 16.5
Attn(dB): 18.0 6.2
Pwr(dBm): 15.1 8.6
Possible that the C1100z does not support this additional reporting mode?
Am on firmware version CZW002-4.12.009.0.