Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: G.INP on G.992.3 (again)  (Read 2226 times)

Weaver

  • Senior Kitizen
  • ******
  • Posts: 11459
  • Retd s/w dev; A&A; 4x7km ADSL2 lines; Firebrick
G.INP on G.992.3 (again)
« on: April 04, 2017, 09:56:01 PM »

Can I just check - what is the availability of support for G.INP when using G.992.3 and G.992.5 in modems and DSLAMS / MSANs?

I think Burakkucat has it turned on in his modem but is it actually working i.e. supported by the TT LLU DSLAM?

There was a mention in an old thread of someone using proprietary PhyReTx from Broadcom I think in both modem and Broadcom DSLAM - can't find it at the moment.
Logged

j0hn

  • Kitizen
  • ****
  • Posts: 4093
Re: G.INP on G.992.3 (again)
« Reply #1 on: April 04, 2017, 10:19:06 PM »

I believe only Sky LLU offered G.INP.
If that's still the case I have no idea.
Logged
Talktalk FTTP 550/75 - Speedtest - BQM

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: G.INP on G.992.3 (again)
« Reply #2 on: April 04, 2017, 10:54:51 PM »

Can I just check - what is the availability of support for G.INP when using G.992.3 and G.992.5 in modems and DSLAMS / MSANs?

I think Burakkucat has it turned on in his modem but is it actually working i.e. supported by the TT LLU DSLAM?

Perhaps the following output will help --

Code: [Select]
$ xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 8000
Last initialization procedure status: 0
Max: Upstream rate = 1016 Kbps, Downstream rate = 5380 Kbps
Bearer: 0, Upstream rate = 984 Kbps, Downstream rate = 5120 Kbps

Link Power State: L0
Mode: ADSL2 Annex A
TPS-TC: ATM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 4.8 6.9
Attn(dB): 45.5 28.5
Pwr(dBm): 0.0 12.6

ADSL2 framing
Bearer 0
MSGc: 59 12
B: 160 30
M: 1 4
T: 1 4
R: 16 10
S: 1.0000 4.0000
L: 1416 268
D: 32 8

Counters
Bearer 0
SF: 2025813 896995
SFErr: 101 0
RS: 131677756 2858354
RSCorr: 21112 33
RSUnCorr: 1294 0

Bearer 0
HEC: 818 0
OCD: 2 0
LCD: 2 0
Total Cells: 397518097 76185223
Data Cells: 5566435 606529
Drop Cells: 0
Bit Errors: 74868 0

ES: 52 0
SES: 0 0
UAS: 46 46
AS: 32919

Bearer 0
INP: 1.00 1.00
INPRein: 0.00 0.00
delay: 8 8
PER: 16.25 18.00
OR: 32.00 8.00
AgR: 5131.95 988.14

Bitswap: 7942/7947 103/108

Total time = 9 hours 9 min 29 sec
FEC: 21112 33
CRC: 101 0
ES: 52 0
SES: 0 0
UAS: 46 46
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Latest 15 minutes time = 9 min 29 sec
FEC: 1944 0
CRC: 1 0
ES: 1 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Previous 15 minutes time = 15 min 0 sec
FEC: 1857 0
CRC: 4 0
ES: 3 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: N/A
Latest 1 day time = 9 hours 9 min 29 sec
FEC: 21112 33
CRC: 101 0
ES: 52 0
SES: 0 0
UAS: 46 46
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
Since Link time = 9 hours 8 min 43 sec
FEC: 21112 33
CRC: 101 0
ES: 52 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0
$ xdslctl info --cfg
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 8000
Last initialization procedure status: 0
Max: Upstream rate = 1012 Kbps, Downstream rate = 5488 Kbps
Bearer: 0, Upstream rate = 984 Kbps, Downstream rate = 5120 Kbps


adslAnnexAParam: 00101980
adslTrainingMarginQ4: -1
adslShowtimeMarginQ4: -1
adslLOMTimeThldSec: -1
adslDemodCapMask: 0090447a
adslDemodCapValue: 0090447a
adsl2Param: 00000000
adslPwmSyncClockFreq: 0
adslHsModeSwitchTime: 0
adslDemodCap2Mask: 00d00000
adslDemodCap2Value: 00d00000
vdslParam: 00000000
vdslParam1: 00000000
xdslAuxFeaturesMask: 00000003
xdslAuxFeaturesValue: 00060003
vdslCfgFlagsMask: 00000000
vdslCfgFlagsValue: 01200404
xdslCfg1Mask: 00000000
xdslCfg1Value: 00000000
xdslCfg2Mask: 00000000
xdslCfg2Value: 00000000
xdslCfg3Mask: 00000000
xdslCfg3Value: 00000000
xdslCfg4Mask: 00000000
xdslCfg4Value: 00000000
maxDsDataRateKbps: 0
maxUsDataRateKbps: 0
maxAggrDataRateKbps: 0
xdslMiscCfgParam: 00000000
AFE_ID: 40808200 00000000
$ xdslctl info --vendor
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 8000
Last initialization procedure status: 0
Max: Upstream rate = 1012 Kbps, Downstream rate = 5476 Kbps
Bearer: 0, Upstream rate = 984 Kbps, Downstream rate = 5120 Kbps

ChipSet Vendor Id: IFTN:0x71c8
ChipSet VersionNumber: 0x71c8
ChipSet SerialNumber:
$
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

tickmike

  • Kitizen
  • ****
  • Posts: 3640
  • Yes Another Penguin !. :)
Re: G.INP on G.992.3 (again)
« Reply #3 on: April 05, 2017, 12:22:04 AM »

This is something I have asked my isp and a BT OR sfi and both had no info for it on ADSL2
Logged
I have a set of 6 fixed IP's From  Eclipse  isp.BT ADSL2(G992.3) line>HG612 as a Modem, Bridge, WAN Not Bound to LAN1 or 2 + Also have FTTP (G.984) No One isp Fixed IP >Dual WAN pfSense (Hardware Firewall and routing).> Two WAN's, Ethernet LAN, DMZ LAN, Zyxel GS1100-24 Switch.

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: G.INP on G.992.3 (again)
« Reply #4 on: April 05, 2017, 12:40:44 AM »

As far as I know only sky use g.inp on adsl2 in the UK, but I may be wrong as I havent really followed adsl2 post FTTC launch.
Logged

ejs

  • Kitizen
  • ****
  • Posts: 2078
Re: G.INP on G.992.3 (again)
« Reply #5 on: April 05, 2017, 08:44:33 PM »

The thread with one person using PhyR on WBC ADSL2+
http://forum.kitz.co.uk/index.php/topic,18325.0.html
Logged