Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1] 2 3

Author Topic: Adva FSP150CP Manual Required  (Read 36903 times)

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Adva FSP150CP Manual Required
« on: March 17, 2017, 11:59:19 PM »

Does anyone have (access to) a copy of the (user) manual for an Adva FSP150CP that they could share, please? An electronic copy, PDF format, would be perfectly usable.

The label, affixed to the rear of the device, tantalisingly states  "Please read the manual provided."

As all my searches, to date, have ended in failure, I turn to fellow Kitizens in the hope that someone may be able to assist.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

WWWombat

  • Kitizen
  • ****
  • Posts: 1674
Re: Adva FSP150CP Manual Required
« Reply #1 on: March 18, 2017, 01:37:29 AM »

Been buying some ex-EAD kit?

I can't help directly, but can offer some reading material in the meantime...

This document shows a bit more of the family:
http://www.fujitsu.com/downloads/TEL/fnc/datasheets/FSP150ds.pdf

I get the impression that the 150CP has ended up being replaced by some variant of the 150CC, and they appear to do very similar jobs ... but a few alternative connectors.
And I did find a manual for the 150CCf-825:
http://medusa.noanet.net/bin/CCf825_INST_OPS%20R1%5B1%5D.2.pdf

There is also a Quick Start guide on scribd, but it needs you to join...
https://www.scribd.com/document/253218471/Manual-ADVA-FSP-150CC-825
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Adva FSP150CP Manual Required
« Reply #2 on: March 18, 2017, 05:40:05 PM »

Been buying some ex-EAD kit?

Indeed! (At a cost of £0-99, plus delivery to local Argos, who wouldn't?)  :D

[youtube]YxiyXbjoTSA[/youtube]


If the video is paused at the following times -- 2m 16s, 2m 45s, 3m 00s - 3m 24s, 4m 56s & 7m 02s -- interesting images will be seen.

Quote
I can't help directly, but can offer some reading material in the meantime...

This document shows a bit more of the family:
http://www.fujitsu.com/downloads/TEL/fnc/datasheets/FSP150ds.pdf

I get the impression that the 150CP has ended up being replaced by some variant of the 150CC, and they appear to do very similar jobs ... but a few alternative connectors.
And I did find a manual for the 150CCf-825:
http://medusa.noanet.net/bin/CCf825_INST_OPS%20R1%5B1%5D.2.pdf

There is also a Quick Start guide on scribd, but it needs you to join...
https://www.scribd.com/document/253218471/Manual-ADVA-FSP-150CC-825

Thank you for those links. From my research, it appears that the FSP150CP is an Adva special for the BT Group.

My current quest is to discover the credentials required for access via the Management Serial port and, subsequently, how to modify the existing configuration.

With a "null modem" cable from the FSP150CP's serial port to my laptop computer, I invoke screen -L -U /dev/ttyS0 57600 and then power-on the device.

Code: [Select]

Booting ...

HW is 0006
Verifying flash image
Configuring FPGA
Interrogating EEPROM
Clearing SDRAM
Initialising forwarding engine
Initialising CPLD
Initialising H/W devices
Initialising clock
Initialising LM80
Testing LEDs
Initialising traffic management
Initialising PHYs
Initialising packet interface

System Compiled Aug  4 2008 16:21:53



FSP150 v2.6.1.6

Login    : admin
Password : *****
Login incorrect

Login    :

It is almost a reflex reaction to enter admin/admin at a login/password prompt pairing.  ;)

I have tried all variants that I can think of, based on the information printed on the label shown in the second of the two images, attached to my earlier post, and also the handwritten Circuit No & SNEID from the other front panel label.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

WWWombat

  • Kitizen
  • ****
  • Posts: 1674
Re: Adva FSP150CP Manual Required
« Reply #3 on: March 19, 2017, 01:31:30 PM »

That's certainly some interesting kit to play with. I saw that video (or one like it) quite recently.

As it happens, I also found this page when I was looking:
http://www.rainsbrook.co.uk/wiki/doku.php/rb/adva-fsp150

That shows the default user/password, and a way to reset the box back to the default. Still the wrong box, though.
User: Root
Passwd: ChgMeNOW

This doc (on scribd) has more info for the CC box too:
https://www.scribd.com/document/204701537/Adva-Training-FSP-150CC-GE20x-R4-x-Course-2-Administration

As luck would have it, the visible pages happen to confirm 3 userid to try:
User: root
User: netadmin
User: user
Passwd: ChgMeNOW
Logged

WWWombat

  • Kitizen
  • ****
  • Posts: 1674
Re: Adva FSP150CP Manual Required
« Reply #4 on: March 19, 2017, 01:55:29 PM »

My current quest is ...

I should ask ... do they provide a working link right now? Or do you need to get to the console to get it working?
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Adva FSP150CP Manual Required
« Reply #5 on: March 20, 2017, 12:01:59 AM »

I should ask ... do they provide a working link right now? Or do you need to get to the console to get it working?

Absolutely nothing from the Gigabit Ethernet port . . .  :(

I had come across that rainsbrook.co.uk page and nothing shown there is relevant.

I have also tried powering the device on whilst the space-bar of the management terminal is held depressed but it does not interrupt the boot process.

Using covaro1 as the user name and covaro#1 as the password is also a negative.

With the average domestic CPE it is just the case of applying one's favourite opened out paper clip into the relevant orifice (or in my case a scrap, cheapo, meter probe that serves no other use other than to reset devices). With a Watchfront Firebrick it is just a case of linking together two of the Ethernet ports before powering up the device. So to my mind there must be some way of resetting the FSP150CP back to a default configuration with default login credentials. Hence my desire to ". . . read the manual provided."

Quote
That's certainly some interesting kit to play with.

I have some ideas "in mind" and I will share my thoughts, in due course.

Quote
This doc (on scribd) has more info for the CC box too:
https://www.scribd.com/document/204701537/Adva-Training-FSP-150CC-GE20x-R4-x-Course-2-Administration

As luck would have it, the visible pages happen to confirm 3 userid to try:
User: root
User: netadmin
User: user
Passwd: ChgMeNOW

Thank you for that link. I'll give those credentials a try . . .
« Last Edit: March 20, 2017, 07:26:09 PM by burakkucat »
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Adva FSP150CP Manual Required
« Reply #6 on: March 20, 2017, 12:31:35 AM »

And here is the result --

Code: [Select]
Booting ...

HW is 0006
Verifying flash image
Configuring FPGA
Interrogating EEPROM
Clearing SDRAM
Initialising forwarding engine
Initialising CPLD
Initialising H/W devices
Initialising clock
Initialising LM80
Testing LEDs
Initialising traffic management
Initialising PHYs
Initialising packet interface

System Compiled Aug  4 2008 16:21:53



FSP150 v2.6.1.6

Login    : covaro1
Password : ******** <--- Using "covaro#1"
Login incorrect

Login    : root
Password : ******** <--- Using "ChgMeNOW"
Login incorrect

Login    : netadmin
Password : ******** <--- Using "ChgMeNOW"
Login incorrect

Login    : user
Password : ******** <--- Using "ChgMeNOW"
Login incorrect

Login    : reset
Password : ******** <--- Using "ChgMeNOW"
Login incorrect

Login    : help
Password : **** <--- Using "help"
Login incorrect

Login    : I would like to do so but you do not permit my access!
Password : ******** <--- Using "ChgMeNOW"
Login incorrect

Login    : Login
Password : ******** <--- Using "Password"
Login incorrect

Login    :
Booting ... <--- Powering on the device with the Escape key held depressed on the management terminal.

HW is 0006
Verifying flash image
Configuring FPGA
Interrogating EEPROM
Clearing SDRAM
Initialising forwarding engine
Initialising CPLD
Initialising H/W devices
Initialising clock
Initialising LM80
Testing LEDs
Initialising traffic management
Initialising PHYs
Initialising packet interface

System Compiled Aug  4 2008 16:21:53



FSP150 v2.6.1.6

Login    :
Password :
Login    :
Booting ... <--- Powering on the device with <Ctrl>-C held depressed on the management terminal.

HW is 0006
Verifying flash image
Configuring FPGA
Interrogating EEPROM
Clearing SDRAM
Initialising forwarding engine
Initialising CPLD
Initialising H/W devices
Initialising clock
Initialising LM80
Testing LEDs
Initialising traffic management
Initialising PHYs
Initialising packet interface

System Compiled Aug  4 2008 16:21:53



FSP150 v2.6.1.6

Login    :
Password :
Login    :

  :(
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

licquorice

  • Reg Member
  • ***
  • Posts: 977
Re: Adva FSP150CP Manual Required
« Reply #7 on: March 20, 2017, 08:59:32 AM »

It's a long time ago since the last time I played with ADVA kit, I thought I might still have some documents lurking in a dark corner of my HDD but I can't find any. Not sure how you are connecting them together but with some kit (can't remember if ADVA was one) unless you have an input at the 'A' end there will be no output at the 'B' end.
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Adva FSP150CP Manual Required
« Reply #8 on: March 20, 2017, 07:32:13 PM »

It's a long time ago since the last time I played with ADVA kit, I thought I might still have some documents lurking in a dark corner of my HDD but I can't find any.

Thank you for looking, it is appreciated.

Quote
Not sure how you are connecting them together but with some kit (can't remember if ADVA was one) unless you have an input at the 'A' end there will be no output at the 'B' end.

At present, it is just an attempt to access the configuration of the device and not to send Ethernet frames from one end of an optical link to t'other.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

licquorice

  • Reg Member
  • ***
  • Posts: 977
Re: Adva FSP150CP Manual Required
« Reply #9 on: March 21, 2017, 04:04:00 PM »

Have found another login to try   
Username: ppp      Password: ChgMeNOW
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Adva FSP150CP Manual Required
« Reply #10 on: March 21, 2017, 07:14:41 PM »

Username: ppp      Password: ChgMeNOW

Thank you.

It has occurred to me that there is a distinct possibility that a previous administrator of the device has done as directed and the password is no longer "ChgMeNOW"!  ::)  :-X

Testing the latest suggestion --

Code: [Select]

Booting ...

HW is 0006
Verifying flash image
Configuring FPGA
Interrogating EEPROM
Clearing SDRAM
Initialising forwarding engine
Initialising CPLD
Initialising H/W devices
Initialising clock
Initialising LM80
Testing LEDs
Initialising traffic management
Initialising PHYs
Initialising packet interface

System Compiled Aug  4 2008 16:21:53



FSP150 v2.6.1.6

Login    : ppp
Password : ******** <--- Using "ChgMeNOW"
Login incorrect

Login    : Bah
Password : ******* <--- Using "Humbug!"
Login incorrect

Login    :
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

licquorice

  • Reg Member
  • ***
  • Posts: 977
Re: Adva FSP150CP Manual Required
« Reply #11 on: March 21, 2017, 07:19:06 PM »

There is a distinct possibility a change of password is forced on first login.  :(
Logged

licquorice

  • Reg Member
  • ***
  • Posts: 977
Re: Adva FSP150CP Manual Required
« Reply #12 on: March 21, 2017, 07:38:34 PM »

Have you tried booting with the space key held down on the terminal to invoke a rescue image which may have default login credentials? See page 231 of http://medusa.noanet.net/bin/CCf825_INST_OPS%20R1%5B1%5D.2.pdf posted earlier.
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Adva FSP150CP Manual Required
« Reply #13 on: March 21, 2017, 09:48:01 PM »

Hmm . . . That seems familiar. :hmm:

Ah yes, in Reply #5  --

I have also tried powering the device on whilst the space-bar of the management terminal is held depressed but it does not interrupt the boot process.

  :)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

licquorice

  • Reg Member
  • ***
  • Posts: 977
Re: Adva FSP150CP Manual Required
« Reply #14 on: March 21, 2017, 10:06:58 PM »

Missed that, saw all the other key presses but didn't spot space bar.  :-[
Logged
Pages: [1] 2 3
 

anything