Billion BiPAC 5200 SeriesFrom the web interface
http://192.168.1.254Default username = admin, password = admin
The stats are at the bottom of the page in the ADSL section
How to tell if the connection is interleavedOpen a command line window and type:
telnet 192.168.1.254Enter the admin password when asked.
You will see a prompt which says 'router>'. Type the following:
wan adsl chandataThe response will be similar to this:
router> wan adsl chandata
near-end interleaved channel bit rate: 6368 kbps
near-end fast channel bit rate: 0 kbps
far-end interleaved channel bit rate: 448 kbps
far-end fast channel bit rate: 0 kbps
from which you can see that this connection is interleaved.
Type
exit to close the telnet session.
[attachment deleted by admin]