Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Oldjim]

Reason for asking is that at my last resync on 80/20 the upstream was 9999kb/s

[j0hn]

yes it can, it does. banding has become much more common recently. downstream banding appears to stick quite bad, I'm not so sure on the upstream.
Next resync will be a better indication.

[Oldjim]

next resync will very likely be lower as that result was after a power cut and I always get a higher number then due to absence in cross talk

[broadstairs]

I am intrigued as to how banding works. My d/s has been banded at 59995kbps for months now, at least I assume I am banded as the attainable has been quite a lot higher at least in the past couple of months. Interesting that d/s is almost always exactly 59995kbps on each re-sync.

Stuart

[licquorice]

Its simple, DLM applies banding to your line on a whim and then never removes it!  At least that's my experience of it.

[kitz]

Its simple, DLM applies banding to your line on a whim and then never removes it!  At least that's my experience of it.

It does appear to be that we are seeing more cases of this :/

[GigabitEthernet]

Is there an easy way to tell if you're banded?

[NewtronStar]

Your DS SNRM will increased well above the target margin of 6dB and your sync rate will be much lower that is how you know your line is banded

[licquorice]

Your sync rate will also be at round figure rather than some random figure.

[underzone]

Your sync rate will also be at round figure rather than some random figure.

ie. Data rate:   20000 / 67000 (note all the zeros)

[GigabitEthernet]

The reason I ask is that my SNRM on my line is very odd nowadays. I never sync at the target of 6dB, it's always 6.5 and above and usually 7.5dB or higher.

It may well be due to vectoring.

[NewtronStar]

Your current SNRM is showing as 16.7 dB and a sync of 39999 kbps and a attainable of 61608 kbps now there are two ways to get this result either the user manually caps/bands the modem or the DLM does it 

[GigabitEthernet]

No I am not uploading to MDWS at the moment. That was my doing previous to that though I don't know what happened.

[skyeci]

What contributes to cause the banding to be applied in the first place?
Thanks

[licquorice]

http://www.kitz.co.uk/adsl/DLM.htm
https://community.plus.net/t5/Library/FTTC-DLM-What-it-is-How-it-works/ba-p/1322799