Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[g3uiss]

I went to 206 last night from 204. No significant change to stats

Tony

[npr]

Is the change in upload not caused by the upload INP increasing from 3 to 3.5?

No, it was the downstream INP that increased to 3.5, after a resync it's back to 3.0 still with poor upstream speed.

Interesting find, the year old report of that firmware.

[stevebrass]

I have gone from 204 to 206.

No difference in performance apparent.

[g3uiss]

DS Power reduced fro 11 to 7, although no significant changes as a result. US Power increased slightly.

[npr]

I called BT yesterday, the support guy didn't know anything about the cabinet software change. He did however say he would "reset the network and after 3 to 4 days, a maximum of 7 days, and my speed would be back to normal" I don't know what he meant by "reset the network" but this morning the router re-synced and interleaving has been removed.

It's either a coincidence or the ISP support can request the DLM be reset. 

Upload speed is still bad. 

Status: Showtime
Last Retrain Reason:    0
Last initialization procedure status:   0
Max:    Upstream rate = 681 Kbps, Downstream rate = 25346 Kbps
Bearer: 0, Upstream rate = 610 Kbps, Downstream rate = 25327 Kbps

Link Power State:       L0
Mode:                   VDSL2 Annex B
VDSL2 Profile:          Profile 17a
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        6.1             6.3
Attn(dB):        30.7            0.0
Pwr(dBm):        11.8            4.2

                        VDSL2 framing
                        Bearer 0
MSGc:           22              34
B:              239             18
M:              1               1
T:              64              17
R:              0               0
S:              0.3015          0.9620
L:              6368            158
D:              1               1
I:              240             19
N:              240             19

                        Counters
                        Bearer 0
OHF:            1968215         583013
OHFErr:         936             9
RS:             0               974723
RSCorr:         0               0
RSUnCorr:       0               0

                        Bearer 0
HEC:            1280            0
OCD:            19              0
LCD:            19              0
Total Cells:    464255078               0
Data Cells:     439677          0
Drop Cells:     0
Bit Errors:     0               0

ES:             319             5
SES:            0               1
UAS:            21              2140
AS:             9535

                        Bearer 0
INP:            0.00            0.00
INPRein:        0.00            0.00
delay:          0               0
PER:            4.84            16.41
OR:             46.25           19.49
AgR:            25372.88        629.54

Bitswap:        423/423         0/0

[digitalnemesis]

I think the DLM reset was a coincidence, unless ISPs are now able to request Openreach to perform DLM resets remotely.

[skyeci]

Thought it might be of interest but when Openreach were fault finding my cab recently and were here at my house they carried out some port swaps at the cab end but when the engineer tried to do a dlm reset back at my house he could not get it to go through using the dial in option they seem to do. He then called the operations centre & they did perform a remote dlm reset so openreach must be able to do it at that level if the engineer is unable to get it to work.

[digitalnemesis]

Yes, the Openreach engineer rang HQ from my house when he did a DLM reset. They had to physically disconnect and reconnect the port I was connected since at first the sync remained the same.

The ISP can't do it remotely, it has to be passed to OR and requires an engineer visit to do so. Unless things have changed.

What was the problem with your line?

[skyeci]

It wasnt the line in the end. Duff tails in the cab. They were trying to figure out what the problem was. Has been fine for 26 days but now the ds snrm is at 4.7 from 6.8..attain down some 6-7mb..something has changed yesterday