Computers & Hardware > Networking
Telnet Commands For A Motorola Access Point Wanted.
tickmike:
Telnet Commands For A Motorola Access Point AP6522
On this bit of kit there is No 'push button' reset :o to set back to default settings.
One method you have to use 'telnet' .
Wanting to try different channels for the two radios (as you can not change them via the GUI !) and I do not want to re-set it and then put back all the settings in each time.
Does anyone know what the telnet commands I can try to change them. :hmm:
burakkucat:
Do you have any better links to the device's documentation, please?
The two you've posted, above, do not seem relevant, to me. :-\
kitz:
According to the User Manual
--- Quote ---For a non WiNG Express SKU (AP6522), there’s no OTA
support, and the Access Point utilizes just the UI for its basic setup.
--- End quote ---
fwiw, WiNG CLI commands are here
burakkucat:
I've found a YouTube video that possibly explains the process . . .
[youtube]BXpSYBOLpOQ[/youtube]
From your CLI --
* telnet <IPv4 Address Of AP6522>
* login as admin
* enter your password
* enter the command delete startup-config
* enter the command reload
burakkucat:
I now have a collection of documents relating to the AP6522. (Thanks are due to Kitz for the link to the CLI Reference Guide.) --
* AP6522E_Installation_Guide.pdf
* AP6522_Installation_Guide.pdf
* AP6522_Spec_Sheet.pdf
* WiNG_5.5_CLI_Reference_Guide.pdfIt is very "heavy" reading . . . :o
Navigation
[0] Message Index
[#] Next page
Go to full version