Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[daveesh1]

Yes same hear but was assured that it was the new UPTO 52MB will find out soon enough

[William Grimsley]

The excitement starts to build! Hehe!

[S.Stephenson]

When my 2nd line is sorted on Tuesday I'll be in the 100mbps+ club 

[William Grimsley]

When my 2nd line is sorted on Tuesday I'll be in the 100mbps+ club 

Ah, I may pursuade the parents one day to get line bonding, but it's very expensive, probably if Virgin Media don't roll out here.

[S.Stephenson]

You'd also need a load balancer, my networking setup has gone a bit OTT to be honest especially with the 10Gb stuff.

[William Grimsley]

Hmm, we could get Infinity 2 here if we had 2 lines bonded.

[underzone]

You'd also need a load balancer, my networking setup has gone a bit OTT to be honest especially with the 10Gb stuff.

You have gone 10Gb internal LAN?

[William Grimsley]

Um, excuse me? SNR Margin 6 dB 35 Mbps? Is this actually correct? I am furious!

How the hell can I be on an SNR of 6 dB and banded? I think the only way to remove it is to power down the router for 30 minutes to get rid of the stuck profile?

It's got to be router end surely? The DLM wouldn't have just left the banding on if the line has been completely reset?

[William Grimsley]

Just rebooted the router, still no change so it isn't the router side, I am absoloutely fuming! WHY?

[Dray]

Looks like you've lost G.INP. I suggest you leave it alone for a couple of weeks.

[William Grimsley]

I may have lost it but why is my line rate still banded, that's not the whole point? How does that help this very serious situation? I've been completely robbed!

I don't think loosing G.INP means that my banded line is still in place.

32 minute power down could be the only answer here...

[William Grimsley]

New line stats:

xDSL
Mode   VDSL2
Traffic Type   PTM
Status   Up
Link Power State   L0
Downstream   Upstream
Line Coding (Trellis)   On   On
SNR Margin (dB)   6.5   5.9
Attenuation (dB)   25.6   0.0
Output Power (dBm)   12.1   5.3
Attainable Rate (Kbps)   46082   8079
Rate (Kbps)   34998   8079
B (# of bytes in Mux Data Frame)   31   239
M (# of Mux Data Frames in an RS codeword)   1   1
T (# of Mux Data Frames in an OH sub-frame)   64   43
R (# of redundancy bytes in the RS codeword)   10   0
S (# of data symbols over which the RS code word spans)   0.0290   0.9440
L (# of bits transmitted in each data symbol)   11568   2034
D (interleaver depth)   1123   1
I (interleaver block size in bytes)   42   120
N (RS codeword size)   42   240
Delay (msec)   8   0
INP (DMT symbol)   3.50   0.00
OH Frames   536564   147195
OH Frame Errors   0   4
RS Words   205904822   2073743
RS Correctable Errors   2676   0
RS Uncorrectable Errors   0   0
HEC Errors   0   0
OCD Errors   0   0
LCD Errors   0   0
Total Cells   101088756   0
Data Cells   1368670   0
Bit Errors   0   0
Total ES   0   3
Total SES   0   0
Total UAS   28   28

[daveesh1]

Mine still banded also

[digitalnemesis]

Ok so going from 76/20 to 55/10 = no DLM reset?

William did you allow DLM to retrain the line or do it manually? Perhaps it's not yet switched to the new package?

[William Grimsley]

Mine still banded also

Hmm, very strange. Oh what do we do now? Argh, what is wrong with these DSLAM's? LOL!