Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Xup]

No Vectoring

On BT 55/10

[j0hn]

Vectoring state 1 means it's enabled

[Xup]

Vectoring state 1 means it's enabled

Damn does that mean I'm actually one of first for something. 

[burakkucat]

It means it is enabled in your CPE -- the Billion modem/router.

But the big question is:  "Does 'enabled' mean that vectoring is active on the circuit in question?" 

[ejs]

The VCE MAC address being something other than all zeroes, plus the non-zero counts for the error samples sent, indicate that vectoring is operating on this line.

The vectoring state number does also indicate that it is in operation - I think it's been reported previously that it changes between 1 and 3, presumably depending on what vectoring activity is currently occurring.

[Chrysalis]

It means it is enabled in your CPE -- the Billion modem/router.

But the big question is:  "Does 'enabled' mean that vectoring is active on the circuit in question?" 

I think it is enabled on the live connection, it will show 5 if its not.

interesting.

[banger]

5 indicates not configured on my TP-Link I think the 1 status indicates it is live on the circuit.

[roseway]

See http://forum.kitz.co.uk/index.php/topic,13930.msg349129.html#msg349129 for the list of vectoring states.

A state of 1 indicates that vectoring is fully operational.

[Xup]

Cheers for all the info guys as its all above my head .

Big jump in attainable when you realise attainable was 42-4300 before the 3DB margin(old 6db).
Now with a 9db margin, attainable is 67000.
Question now is it here to stay on my line? or is it just a test.

[Chrysalis]

hopefully its here to stay, I know its going to make ECI users pretty annoyed, but I hold no grudge against hauwei people, so fingers crossed for you it stays, thats quite a jump. Is a shame you not on MDWS then we could have analysed loads of data.

[ejs]

You probably don't have a 9 dB target SNRM. The SNRM is higher than whatever the target is because the speed is capped at 55Mb. The attainable will be calculated using the target SNRM.

[ktz392837]

hopefully its here to stay, I know its going to make ECI users pretty annoyed,

Using every muscle in my body not to have a rant about the ECI cabinets it has been a few months since my last one!

I am saving up my energy ready for the announcement that Ginp and 3db will never be implemented on ECI as they can't get it to work.  Must be getting closer to a further update on this soon.

[Xup]

hopefully its here to stay, I know its going to make ECI users pretty annoyed, but I hold no grudge against hauwei people, so fingers crossed for you it stays, thats quite a jump. Is a shame you not on MDWS then we could have analysed loads of data.

MDWS will it run with just a Billion 8800NL connected to the line ?

[skyeci]

Here we go again.. eci users short changed   

Another reason to move to huawei area 

[lee111s]

This could simply be a BDUK Huawei cabinet that's had vectoring switched on the meet some "over 24mbps" targets by extending the reach to further away properties.

There are a few of them kicking about.