Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Feedback for the G.INP Retransmission page  (Read 1572 times)

ejs

  • Kitizen
  • ****
  • Posts: 2002
Feedback for the G.INP Retransmission page
« on: April 24, 2016, 07:58:20 PM »

http://www.kitz.co.uk/adsl/retransmission.htm

Thinking about how G.INP works in another thread, I also looked at the kitz page on G.INP retransmission. Particularly the bit on "How does G.INP / Retransmission work?"

Quote
3. Original data packets are sent over Bearer Channel 0 as normal.
...
6. Upon receipt of a re-request, the transmitting modem/DSLAM will retrieve the relevant DTU and resend over Bearer Channel 1.

I'm not sure point 6 is correct. The G.998.4 PDF says one latency path carries only overhead data, and the other carries only DTUs. So I think the re-transmitted DTUs get sent over the same channel they were originally sent over.
Logged

kitz

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 32224
  • Trinity: Most guys do.
    • http://www.kitz.co.uk
Re: Feedback for the G.INP Retransmission page
« Reply #1 on: April 24, 2016, 08:01:07 PM »

Thinking about it you may be correct.
I have to go out now,  nor will I be around tomorrow.

I shall mark this thread as unread, then double check it when I get more time.

Thanks.
Logged
Please do not PM me with queries for broadband help as I may not be able to respond.
-----
How to get your router line stats :: ADSL Exchange Checker

WWWombat

  • Kitizen
  • ****
  • Posts: 1674
Re: Feedback for the G.INP Retransmission page
« Reply #2 on: April 30, 2016, 09:32:04 PM »

I agree with @ejs here. Many (including me) originally thought bearer 1 was used to carry the re-transmissions, but it eventually became clear that it only really had room to carry some of the overhead.

Nowadays, I think that DTU's are only sent over bearer 0, for both original transmission and re-transmission.
Logged
 

anything