Is it too soon to say when will it support mdws and rpi? Only joking looks very promising thanks for looking at this.
I'm not sure yet, but it's getting closer, bit by bit.
I still don't fully understand what data can be gleaned from an ECI modem & some of the data that I can obtain isn't very detailed. e.g. QLN, Hlog & SNR have average values for 8 tones grouped together, unlike a HG612 etc. that provides data per tone.
As my existing programs use the familiar Discovery Phase band plans for various matters, including sorting DS & US data into differing colours, the band plan data I can get from the ECI for my connection isn't particularly helpful.
Band Plan Data from HG612 for my connection to a Huawei DSLAM:-
Discovery Phase (Initial) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
Medley Phase (Final) Band Plan
US: (7,32) (871,1200)
DS: (33,859) (1216,1766)
Band Plan data from an ECI modem (same connection):-
nReturn=0 nDirection=0 nNumData=2
nFormat=(nBandIndex, (nLimit_firstToneIndex, nLimit_lastToneIndex), (nBorder_firstToneIndex, nBorder_lastToneIndex)) nData="
(00,(0007,0032),(0007,0031))
(01,(0871,1196),(0880,1195))
"
nReturn=0 nDirection=1 nNumData=2
nFormat=(nBandIndex, (nLimit_firstToneIndex, nLimit_lastToneIndex), (nBorder_firstToneIndex, nBorder_lastToneIndex)) nData="
(00,(0033,0859),(0048,0859))
(01,(1216,1924),(1217,1699))
"
Could someone who can achieve much higher speeds than I can please post their ECI raw band plan data via these commands:-
root@OpenWrt:~# echo "bbsg 0" > /tmp/pipe/dsl_cpe0_cmd ; cat /tmp/pipe/dsl_cpe0_ack&
root@OpenWrt:~# echo "bbsg 1" > /tmp/pipe/dsl_cpe0_cmd ; cat /tmp/pipe/dsl_cpe0_ackI have attached an example of graphing progress to date, but there's still a lot to do before I'll be happy to release it for Beta testing.
EDIT:
Just for cross-reference purposes, I have attached a recent example of data for my connection via a HG612 modem.
It is the example with 6 information/graph panels.