Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[burakkucat]

Thank you. I now understand your logic.

[Dray]

Pity it's not conclusive proof though. It could be just because of the removal of Interleaving on the ECI cabinet setup, or even because of the matching chipsets in the cabinet and HH5.

[S.Stephenson]

Pity it's not conclusive proof though. It could be just because of the removal of Interleaving on the ECI cabinet setup, or even because of the matching chipsets in the cabinet and HH5.

I've always been on fast path.

With the matching chipset before G.INP I'd get 62mbit/s tops.

I could only know 100% if I got a GEA service test but I'm with BT Retail so it's not worth the hassle.

I'm like 90% sure G.INP is active on the HH5a.

[Dray]

You can prove it by comparing your sync speed with your IP Profile

[S.Stephenson]

Sync = 65852
IP Profile =63740

Ratio = 0.968

I know that it definitely works on my HG612 as I have access to stats, on the HH5a I can't be 100% unless the ratio gives a clue.

[attachment deleted by admin]

[Dray]

Well that's showing as G.INP being off.

[S.Stephenson]

Well that's showing as G.INP being off.

Can the ratios be compared to a typical Huawei one?

Their is no bit rate for bearer 1 for example on ECI, is the implementation not different?

Either way it syncs higher than it used to.

Also ratio with HG612 with G.INP on was 0.967.

[Dray]

The thing is that G.INP gives you a much smoother connection, ideal for streaming films say.  I take it you are aware that you can use the HG612 to feed the HH5 and just use the HH5 as a router.

[S.Stephenson]

The thing is that G.INP gives you a much smoother connection, ideal for streaming films say.  I take it you are aware that you can use the HG612 to feed the HH5 and just use the HH5 as a router.

I'm still convinced the HH5a has G.INP enabled, I know the HG612 is much more stable however the speed sits in my use case with the HH5a whereas without its just outside the zone.

Basically I need enough bandwidth for UHD BT Sports and A UHD stream, the HG612 is just slightly out of the range at the moment.

[Dray]

Basically I need enough bandwidth for UHD BT Sports and A UHD stream

You mean simultaneously?

[S.Stephenson]

Basically I need enough bandwidth for UHD BT Sports and A UHD stream

You mean simultaneously?

Pretty much there is usually something else going on also, can sometimes be 3 UHD steams occurring simultaneously.

Use around 4TB of data a month.

[Dray]

And the difference in sync between the HG612 and HH5 makes a difference for you? Amazing.

[S.Stephenson]

And the difference in sync between the HG612 and HH5 makes a difference for you? Amazing.

It's a case of 61mbit on the HH5a works with no dropping of quality, and I have issues at 58Mbits on the HG612.

Its just a case of that tiny amount of headroom.

[tbailey2]

He means on the HH5a TBailey, I know that it definitely works on my HG612 as I have access to stats, on the HH5a I can't be 100% unless the ratio gives a clue.

Okay, didn't realise that was what you were using. I've pulled that post..

[Dray]

I suppose another explanation could be that there's an inherent problem with G.INP on ECI cabs.