Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[adslmax]

Here is openreach approved for all fibre vdsl router as self install for future use: https://pulse8broadband.co.uk/docs/Pulse8-Broadband-and-Line-Rental-Charges.pdf

[kitz]

Thanks.

There's also a full list of modems which have passed the BT conformance here:-

http://forum.kitz.co.uk/index.php/topic,16097.msg305559.html#msg305559

Ive since seen another official BT doc and it looks like that list is still correct as at end of year 2015

[gt94sss2]

There's also a full list of modems which have passed the BT conformance here:-

I assume that list deliberately excludes the 2 models Openreach supply and the own branded/customised ones supplied directly by the large ISPs (i.e. Home Hubs and the SR102) - though I am sure they have undergone testing/passed [and some of the chipsets are used in others which are on this list]

[ejs]

I'm not even sure the Openreach ECI modems have been provided with firmware that supports vectoring.

The version I have from the modem is:
 dsl_vr9_firmware_xdsl-05.06.07.05.01.06_05.06.02.03.00.01.bin
The version version from the Openreach source is:
 dsl_vr9_firmware_xdsl-05.04.07.09.01.06_05.04.04.04.01.01.bin

The last digit of the VDSL2 firmware, 6 = no vectoring, 7 = vectoring.

Relatively little is known about what capabilities are supported and enabled in the ECI modems, compared to the HG612, because the ECI modems are harder to unlock. But it looks like, at one point at least, their firmware did not support vectoring. Since a firmware update for the ECI modems to support upstream G.INP never seemed to happen, it seems doubtful anything else is going to be added.