Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 2 [3]

Author Topic: Using new router/modem combination  (Read 9031 times)

sof006

  • Reg Member
  • ***
  • Posts: 159
Re: Using new router/modem combination
« Reply #30 on: October 16, 2015, 10:36:27 PM »

Hooked up my HG612 to use DSLstats program...

Speed is pretty poor from what I used to get about a month or so ago.

xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:   0
Last initialization procedure status:   0
Max:   Upstream rate = 25691 Kbps, Downstream rate = 81884 Kbps
Bearer:   0, Upstream rate = 20000 Kbps, Downstream rate = 67579 Kbps

Link Power State:   L0
Mode:         VDSL2 Annex B
VDSL2 Profile:      Profile 17a
TPS-TC:         PTM Mode(0x0)
Trellis:      U:ON /D:ON
Line Status:      No Defect
Training Status:   Showtime
      Down      Up
SNR (dB):    6.3       9.6
Attn(dB):    14.1       0.0
Pwr(dBm):    13.3       3.6
         VDSL2 framing
         Bearer 0
MSGc:      18      150
B:      45      236
M:      1      1
T:      64      5
R:      14      16
S:      0.0217      0.3771
L:      22168      5410
D:      1663      1
I:      60      255
N:      60      255
         Counters
         Bearer 0
OHF:      6426125      1459471
OHFErr:      0      2
RS:      1644905872      329450
RSCorr:      1825      61
RSUnCorr:   0      0

         Bearer 0
HEC:      0      0
OCD:      0      0
LCD:      0      0
Total Cells:   1161811475      0
Data Cells:   26287506      0
Drop Cells:   0
Bit Errors:   0      0

ES:      0      2
SES:      0      0
UAS:      66      66
AS:      8941

         Bearer 0
INP:      4.00      0.00
INPRein:   0.00      0.00
delay:      9      0
PER:      1.39      6.15
OR:      138.01      202.87
AgR:      67717.34   20203.27

Bitswap:   3340/3340      1/1

Total time = 2 hours 30 min 7 sec
FEC:      1825      61
CRC:      0      2
ES:      0      2
SES:      0      0
UAS:      66      66
LOS:      0      0
LOF:      0      0
LOM:      0      0
Latest 15 minutes time = 7 sec
FEC:      0      0
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Previous 15 minutes time = 15 min 0 sec
FEC:      139      0
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Latest 1 day time = 2 hours 30 min 7 sec
FEC:      1825      61
CRC:      0      2
ES:      0      2
SES:      0      0
UAS:      66      66
LOS:      0      0
LOF:      0      0
LOM:      0      0
Previous 1 day time = 0 sec
FEC:      0      0
CRC:      0      0
ES:      0      0
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
Since Link time = 2 hours 28 min 59 sec
FEC:      1825      61
CRC:      0      2
ES:      0      2
SES:      0      0
UAS:      0      0
LOS:      0      0
LOF:      0      0
LOM:      0      0
#


If I leave it alone what are the chances of the speed going back to normal?

Interleave shows as "ON" and (1663)
Logged

sof006

  • Reg Member
  • ***
  • Posts: 159
Re: Using new router/modem combination
« Reply #31 on: October 18, 2015, 05:04:20 PM »

Nobody?
Logged

loonylion

  • Reg Member
  • ***
  • Posts: 723
Re: Using new router/modem combination
« Reply #32 on: October 18, 2015, 05:10:57 PM »

67Mbps is hardly poor. Chances are more people have been added to your cabinet and you've lost speed to crosstalk.
Logged

michty_me

  • Reg Member
  • ***
  • Posts: 631
Re: Using new router/modem combination
« Reply #33 on: October 18, 2015, 10:06:21 PM »

Is it the correct firmware on the hg612?
I would be cautious as to what the dsl-ac68u tells you as mine never gave a true representation of my stats.
Logged

sof006

  • Reg Member
  • ***
  • Posts: 159
Re: Using new router/modem combination
« Reply #34 on: October 19, 2015, 02:41:45 PM »

Is it the correct firmware on the hg612?
I would be cautious as to what the dsl-ac68u tells you as mine never gave a true representation of my stats.

Yes its the latest firmware. I am using DSLstats program to tell me the exact line stats from the HG612
Logged

michty_me

  • Reg Member
  • ***
  • Posts: 631
Re: Using new router/modem combination
« Reply #35 on: October 19, 2015, 02:43:58 PM »

Just thought I woukd check as mine synched around that area when it had an older firmware on it.
Logged
Pages: 1 2 [3]