Caveat this modem has been flashed before several months ago to the G.INP f/w. But I cannot log into it as I intend to run the monitoring software.
I've also reset it following these instructions
The reset button serves three purposes:
(1) With the HG612 powered up, a “press and release” will cause the device to re-boot.
(2) With the HG612 powered up, a “press, hold for 5 – 10 seconds, then release” will reset the device to the default configuration and cause a re-boot.
(3) With the HG612 currently powered down, a “press, hold, power up the device, continue to hold for 10 – 20 seconds, then release” will cause the Broadcom bootloader firmware update page to be accessible from the default IPv4 address of 192.168.1.1
However entering username:admin password:admin
does not work.
I can get the EchoLife Home Gateway screen to appear when I enter the IP:
http://192.168.1.1/My connection is as follows:
HG612 WAN (LAN1) to WAN port on Asus AC66U
Asus AC66U Port 1 goes to my switch
Asus AC66U Port 2 goes to LAN 2 on the HG612
PC is connected via the switch
Asus Settings
LAN-LAN IP
IP Address: 192.168.1.2
LAN - DHCP Server
RT-AC66U IP address:192.168.1.2
IP Pool Starting Address:192.168.1.1
IP Pool Ending Address:192.168.1.254
PC Ethernet settings
- Obtain IP address automatically.
I did put in 192.168.1.100 and I got that limited access yellow symbol
Please help