Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[broadstairs]

Stuart, it's supposed to check the configured value every time, but it looks as though there's a bug there. I'll endeavour to fix it.

Thanks Eric.

Stuart

[broadstairs]

Eric I have another issue but dont know if it is my router reporting badly or DSLStats. The SES averages screen for day 1 shows 136 SES for the 24 hour period but my telnet data shows nothing like this:-

Code: [Select]

adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    1
Last initialization procedure status:   0
Max:    Upstream rate = 23811 Kbps, Downstream rate = 75616 Kbps
Bearer: 0, Upstream rate = 20000 Kbps, Downstream rate = 63519 Kbps

Link Power State:       L0
Mode:                   VDSL2 Annex B
VDSL2 Profile:          Profile 17a
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        5.8             6.8
Attn(dB):        17.1            0.0
Pwr(dBm):        13.0            5.1

                        VDSL2 framing
                        Bearer 0
MSGc:           18              150
B:              51              236
M:              1               1
T:              64              5
R:              12              16
S:              0.0260          0.3771
L:              19656           5410
D:              1243            1
I:              64              255
N:              64              255

                        Counters
                        Bearer 0
OHF:            281621071               274842
OHFErr:         301             136
RS:             3375366018              1280061
RSCorr:         1244097         2779
RSUnCorr:       13545           0

                        Bearer 0
HEC:            2599            0
OCD:            2               0
LCD:            2               0
Total Cells:    1737423204              0
Data Cells:     44888497                0
Drop Cells:     0
Bit Errors:     0               0

ES:             5955            942
SES:            35              5
UAS:            64              53
AS:             471447

                        Bearer 0
INP:            3.00            0.00
INPRein:        0.00            0.00
delay:          8               0
PER:            1.67            6.15
OR:             114.72          202.87
AgR:            63633.43        20203.27

Bitswap:        114249/114252           3506/3603

Total time = 66 days 5 hours 25 min 16 sec
FEC:            3452696733              77538
CRC:            69154           3012
ES:             5955            942
SES:            35              5
UAS:            64              53
LOS:            1               0
LOF:            5               0
LOM:            0               0
Latest 15 minutes time = 10 min 16 sec
FEC:            1692            0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Previous 15 minutes time = 15 min 0 sec
FEC:            2712            0
CRC:            0               0
ES:             0               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Latest 1 day time = 5 hours 25 min 16 sec
FEC:            45079           15
CRC:            1               0
ES:             1               0
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Previous 1 day time = 24 hours 0 sec
FEC:            169999          812
CRC:            9               30
ES:             5               11
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
Since Link time = 5 days 10 hours 57 min 25 sec
FEC:            1244097         2779
CRC:            301             136
ES:             66              56
SES:            0               0
UAS:            0               0
LOS:            0               0
LOF:            0               0
LOM:            0               0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0
 >

Stuart

[roseway]

Stuart, there's a bug lurking in the averages calculation which I've been unable to trace. If you reset the averages they should be accurate for some time, and if you switch to the modem/router uptime averages they should be accurate and remain so.

[NewtronStar]

It's funny you should mention the modem/router averages roseway, my DSLstats seems to default to 24 hour averages after closing down the program even when i select modem/router uptime averages it goe's back to 24 hour averages 

[roseway]

You're probably right, NS. I don't think the setting is saved. I'll add that in the next release.

[broadstairs]

Eric this afternoon I had a 'divide by zero' error from DSLStats, is this a known error? Only seen the one so far today. Dont know if it is coincidence or not but I have today updated my ZyXEL to the final 11C0 f/w.

Stuart

[roseway]

It's just about impossible to tell, Stuart. There are divisions in numerous places in the program, and tracing a rare event like this is in the "needle in a haystack" category. If it repeats itself it may be possible to relate it to a particular set of circumstances, but failing that I'm not hopeful.

[broadstairs]

It's just about impossible to tell, Stuart. There are divisions in numerous places in the program, and tracing a rare event like this is in the "needle in a haystack" category. If it repeats itself it may be possible to relate it to a particular set of circumstances, but failing that I'm not hopeful.

OK no problem I just thought I ought to mention it in case it helps to build a bigger picture.

Stuart

[les-70]

  This is a bit of an awkward and long question. I am running on a Raspberry Pi.  Only version 5.4 seems totally reliable for me.    It has yet to get divide zero and always restarts fine after modem power off and on.  I get at least one divide zero each day with v5.6 and other versions. Other version have also failed to restart after DLM resyncs.

  I do however have just one minor trouble with the web server (apart that is from it not serving the pages).  I can use the created files with another web server (simplehttpserver -I have only tested and not run this long term) but have trouble with the combined html page.  Looking at the combined html content it looks for a stats and fullstats files ending in .txt which are not there to be found.  I can live with not using the combined file but I am always curious.

If I create an edited an renamed combinedx.htlml file which looks for the stats .html files rather than .txt files (which do exits) it works fine on the PI but not when used via the PC.  (The fact that the edited file does not work on the PC  may well be something to do with my novice use of simplehttpsever , it seems not to update the files served.)  The question is should the .txt files be there or whether it should be using html files.  if it should be using the html files then I may be OK if I can get the webserver to update the files.

    Sorry for the ramble.

[roseway]

@les-70: I'll look at these issues as soon as possible, but I'm afraid it won't be before Tuesday.

[les-70]

Thanks, there is no rush,  I am very busy as well

[les-70]

  Just reporting that I have moved on from trying to get a local webserver working to uploading the files to some webspace.  This is better as I can access the results from anywhere.

 In summary v5.4 remains the only recent version totally reliable on my PI.  No divide zeros and with restart after pause enabled just keeps going.  I just can't get the latest version to last a day without stopping so I afraid that I am unhelpfully living in past. 

 If I create a renamed version of combined.html called index.html and replace the calls to .txt files (that are not created) with appropriate calls to e.g. stats.html the index.html files works fully on the PI but when uploaded (or previously when web served to the PC) the png files are not shown, just the stats.html and fullstats.html.   I am afraid I barely have a clue with linux and rely a lot on googling for my commands and I have near zero clues with html. 

[roseway]

I have to admit that I'm struggling with these issues. For personal reasons I'm not able to spend as much time on the PC as I used to, and it wasn't helped by the fact that I managed to fry my RPi version 2 by being hamfisted when I fitted it in a case.    I'm setting up a new one now.

I'll continue working on the various reported issues, but it will take time, and for the moment major new features are off the agenda.

[les-70]

    No worries just reporting.  Somewhat separate from dslstats, do you or anyone else have any idea why the combined.html file fails to pick up the .png files when all is uploaded.  Given the the files are all there I think things ought to work unless there is something about the combined.html files that only works on the PI. 

   It may be better if I move this issue to another thread as others seem to done this successfully and it is probably my ignorance that is causing my failures.

[les-70]

  The reason the combined.html file does show the images for me when viewed via a webserver or upload seems to be simply that Windows (XP)  can't open the crc.png  etc files.  I will try googling on this issue but I am not aware why this would be.

   edit -- same for viewing with android or via webspace back to Pi