Sure,
I'll try and detail every step from ardsars post.
1) Download the unlock tool from here
https://github.com/LuKePicci/NetgearTelnetEnable/blob/master/binaries/windows/telnetenable.exe2) Place file in C:\Windows\System32.
3) Login to netgear router and click advanced and look at the router information block. Take note of the MAC address in there.
4) This point I made a notepad file with the info if I ever need it again.
5) Open windows command prompt.
6) Type this without the quote marks "telnetenable.exe 192.168.0.1 {MAC ADDRESS of Router LAN Port - in step 3} {user id- default admin} {password- default password}
7) It should look like something like this - telnetenable.exe 192.168.0.1 000FB5A2BE26 admin password
8) Hit enter and you should get a message stating Payload has been sent to Netgear router. Telnet should be enabled.
9) Open DSL Stats, And go to config page. Select one of the netgear routers from the list and delete the username and password info. Hit the play button.