Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[broadstairs]

Well its installed now and up and running. Now to wait and see if it fixes my loss of access problem. The zip file is 24.5mb and contains a .bin, .rom and .pdf files. Looking through the .pdf I can't see why it might fix the issue I have but who knows.

I'll try to find somewhere to upload it so others can try it.

Stuart

[broadstairs]

I now have the file available at https://www.dropbox.com/s/1u8nmewjx7by5s3/V100AAKL10C0.zip?dl=0, I'll leave it there for a while.

Stuart

[PhilipD]

Hi

Many thanks, just downloading now.

Regards

Phil

[npr]

Thanks, downloaded and installed. 
Everything OK, I'll report back if I detect any significant changes from 8C0.

[clonc]

Just upgraded to 10C0,now i'll test it in the next days....thanks broadstairs

[currytop]

Just upgraded to 10C0,now i'll test it in the next days....thanks broadstairs

[Tyke]

10C0 the same as 8C0 on my BT VDSL connection, with sudden disconnects. Back to 7C0 for me!

[AArdvark]

I now have the file available at https://www.dropbox.com/s/1u8nmewjx7by5s3/V100AAKL10C0.zip?dl=0, I'll leave it there for a while.

Stuart

Many thanks. Will see what difference it makes.

Send from LG G3 via Tapatalk (Typos & bad formatting are free)

[clonc]

10C0 the same as 8C0 on my BT VDSL connection, with sudden disconnects. Back to 7C0 for me!

The xdsl driver is the same as in 8C0

[loveextasy]

Have you tried port forwarding yet? Having trouble knowing what to put in the WAN IP box as I have a dynamic IP address.

Can anyone give me any pointers?

I left WAN IP blank and it worked for me, forwarding ports to my Synology DiskStation.

btw, I am using firmware 8C0

[broadstairs]

I have had the hang up again where telnet and local web interface stops working, so 10C0 does not fix this. I have fed back to ZyXEL that this still happens and they need to address it urgently. This time up time was 6 days before it happened. For now I'll leave it running this latest f/w as they may need me to test some stuff.

Stuart

[spudgun]

What AV are you running? As I suspect that ESET Smart Security didn't like something about the Zyxel interface as after a while it would block it and I would get something like you are describing, but as soon as I added its IP address to the 'excluded from checking' list I have had no issues accessing the web interface

[broadstairs]

What AV are you running? As I suspect that ESET Smart Security didn't like something about the Zyxel interface as after a while it would block it and I would get something like you are describing, but as soon as I added its IP address to the 'excluded from checking' list I have had no issues accessing the web interface

I run Linux so that does not apply....

Stuart

[stuker]

hi All

first post.  Just got this router (cheap off ebay) as i wanted to try a single box setup with wireless AC.  Ive upgraded the FW to 08c (got link from this thread thanks) and have connected over 2.4ghz WLAN SSID but the issue i am having is that the 5G WLAN SSID is not visible to any AC enabled devices on my network.  5G is enabled in the gui and the light for 5g is on on the front panel but i cannot see the SSID at all. 
Anyone had this issue before?  Im new to 5g so am i doing anything wrong?

thanks
Stuart

[broadstairs]

No strange incantations needed for 5G, worked out of the box for me ....

Stuart