=~=~=~=~=~=~=~=~=~=~=~= Plink log 2014.10.29 14:00:18 =~=~=~=~=~=~=~=~=~=~=~=
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 30686 Kbps, Downstream rate = 86676 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 75824 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 5.9 15.0
Attn(dB): 13.7 0.0
Pwr(dBm): 12.5 3.8
VDSL2 framing
Bearer 0
MSGc: 18 26
B: 51 237
M: 1 1
T: 64 42
R: 12 16
S: 0.0218 0.3781
L: 23464 5374
D: 1483 1
I: 64 127
N: 64 254
Counters
Bearer 0
OHF: 63443950 1275237
OHFErr: 32 44
RS: 3356568472 285432
RSCorr: 89469 430
RSUnCorr: 6795 0
Bearer 0
HEC: 1256 0
OCD: 17 0
LCD: 17 0
Total Cells: 83942591 0
Data Cells: 56334624 0
Drop Cells: 0
Bit Errors: 0 0
ES: 1 42
SES: 0 0
UAS: 22 22
AS: 88949
Bearer 0
INP: 3.00 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 1.40 3.98
OR: 136.94 64.22
AgR: 75961.27 20063.54
Bitswap: 33753/33753 33/33
Total time = 1 days 42 min 51 sec
FEC: 89469 430
CRC: 32 44
ES: 1 42
SES: 0 0
UAS: 22 22
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 12 min 51 sec
FEC: 1417 1
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 263 5
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 42 min 51 sec
FEC: 2206 9
CRC: 0 3
ES: 0 3
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 87263 421
CRC: 32 41
ES: 1 39
SES: 0 0
UAS: 22 22
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 1 days 42 min 27 sec
FEC: 89469 430
CRC: 32 44
ES: 1 42
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Well over the past 24hrs both crc's and error seconds have not increased at all if this is typical since DLM pointlessly intervened IMO why hasn't it restored my 80/20 fastpath ? it's been over 14 days , the sooner openreach allow isp's control the better, my 1st request will be disable DLM